try 1234 or 0000 it woked for mine
My RAZR V3 worked fine for few months. Now it gives message "enter unlock code", however, the keypad would not accept any entry. Motorola would not accept warranty because out of north america purchase. Can someone please help.
try 1234 or 0000 it woked for mine
I have tried all these - In fact worked with Motorola rep and finally they gave up with comments this could be software issue leading to hardware diability - they would not cover it under warranty as it is apurchase outside north america. Please note I can go to the bootloader screen by following the process in some of the threads.
You can flash a monsterpack - this will eliminate software as the cause
Thanks for reply - couple of questions before I attempt to flash. Is it necessary to backup, if so, how? Also, where can I find the flash file? Please note I have downloaded the following file from one of the sites(is this monsterpack for flash)?
Currently I have following on the cell:
Boot loader: 08.26
SW Ver: R374-G-0E.42.0AR
That file should be fine. Backup any data or files you want to keep
I believe I am getting close - I don't have any phone book entry or any other user specifc file to save. I assume in this case no need to backup; basically I don't know how to backup because the RSD Lite that I plan to use for flash does not give me any option of backup.
Another thing, do I need to change the boot loader (some of the threads talk of down grading to 7.0D or something)?
No - there is no need to downgrade just to flash.
The best way to make a total backup is Flashbackup 3 - but this isn't freeware
one more thing.originally my phone is "open" It was not locked and I was able to use any service provider that offers service with SIM cards. With flash would it become locked?
Also, can I flash without SIM inserted?
Just make sure to use a flash that specifies unlocked (most are). It doesn't matter if SIM is in or not.
take a look at http://www.themotoguide.com/flashingflexing.php
thanks - would try it today and let you know: much appreciated help
it did not go well. After the flash, the phone goes to voice recording. Pressing any key would activate voice recording. Tried another flash file, but same results. It would ring for incoming calls but would not answer. Any solution
Its a problem with the keypad membrane, this also fots with the original problem, you need a new one
is there a solution -this problem was not there before flash. Do you suspect this still could be software related?
What do I need new - the phone?
No - the point of the flash was to eliminate software. And as I said a bad keypad would also explain the original problem (unable to enter code). You need a new keypad membrane
is it something I can fix - like open the keypad and clean or is it toast?
You would need to get a new keypad membrane from ebay or www.cnn.cn or similar. Strip the phone then fit it - its not that difficult. See http://ajay16guides.blogspot.com/
OK - that would be my next step. I believe I am learning some new stuff
I think it is right.I agree with.
I like iphoneconverter com/iphone-video-converter
try this code 00010438. i also tried to RDL lite, my phone is dead at the "BOOT LOADER" screen. any suggestion. I don't have backup.
[b]i have a verizon razr and it keeps asking for a password/code to use the phone. i dont have it cause my brother was messing with my phone and set a password that he cant remember. PLEASE HELP!!![/b]