| Author |
Message |
MaverickRhino
Posts: 3
Phone Model:
Samsung SGH E700
Service Provider:
O2 |
 
Sat Mar 13, 2004 8:04 am |
Has anyone managed to get this to work?
I have bought a USB data cable for my E700, which was advertised with software and plug and play drivers. It came with just a copy of EasyStudio on CD but no drivers.
When I connect the E700 to the PC (running XP Home) it recognises the device and requests a driver. Having searched these forums for help, I downloaded a USB to Serial driver from the web and installed it.
Device manager now shows a new Port (COM 3) as a USB to Serial bridge and seems to recognise the phone under USB controllers as a USB Mass Storage Device.
However, when I fire up EasyStudio it remains offline and will not recognise the phone as being connected. I have changed the settings to port COM 3 and speed 57600.
Any ideas what I need to do to make this work. Has anyone else actually succeeded in making a connection with a USB cable?
Please help, this is driving me mad.
|
 |
Advertisement
|
|
|
|
|
MaverickRhino
Posts: 3
Phone Model:
Samsung SGH E700
Service Provider:
O2 |
Sun Mar 14, 2004 3:04 pm |
Still struggling with this.
Does anyone have the correct driver to enable the PC/EasyStudio to recognise the phone/cable?
Please help, it has to be a driver problem.
|
|
theHustler
Posts: 18
Phone Model:
Nokia 7710
Service Provider:
Airtel - India |
Mon Mar 15, 2004 2:56 am |
|
can you please tell me from where you downloaded the usb to serial driver....i need it urgently please
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Mon Mar 15, 2004 7:29 am |
|
Play a bit with your speed. 57600 is too low 115200 is minimum. Every you've changed the speed press OK and than Reload.
|
|
theHustler
Posts: 18
Phone Model:
Nokia 7710
Service Provider:
Airtel - India |
Mon Mar 15, 2004 9:50 am |
Don,
I have gone thur practically every thread on this forum looking for the USB Device Driver. Found a few but nothing worked. I am not even beng able to get the right drivers for the USB cable. I have tried all the drivers mentioned by you in a lot of other threads. Plus I also tried the PL-2303 Driver. Nothing works...Pls help 
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Mon Mar 15, 2004 10:35 am |
http://forums.mobiledia.com/viewtopic.php?p=18370&highlight=usb#18370
http://forums.mobiledia.com/topic5139.html
http://ucables.com/search/en/usb,serial,cable,drivers
Thats all i could find.
|
|
MaverickRhino
Posts: 3
Phone Model:
Samsung SGH E700
Service Provider:
O2 |
Mon Mar 15, 2004 6:33 pm |
Success at last, changing the speed upwards (not down as I was trying) and it all works.
Thanks (something so simple!)
For USB to Serial Port driver try:
http://tech.prolific.com.tw/visitor/v_welcome.asp
or this:
http://www.matweb-01.com/English/dls-fds.htm#USB
which has all the instructions as well.
|
|
theHustler
Posts: 18
Phone Model:
Nokia 7710
Service Provider:
Airtel - India |
Tue Mar 16, 2004 12:19 am |
Maverick,
Can you pls tell me which drivers to download...as there are so many of them on both sites...
OK...Got the driver..now the next set of questions...
1. Are you using the MAT USB to Serial Bridge of the Pl-2303?
2. If you are using MAT then is it good enough if I follow the instructions mentioned in the CHM help file.
thanks in advance
|
|
nacinfoline
Posts: 3
Phone Model:
SAMSUNG E700
Service Provider:
BSNL |
Wed May 05, 2004 11:00 am |
| -= Don =- wrote: | | Play a bit with your speed. 57600 is too low 115200 is minimum. Every you've changed the speed press OK and than Reload. |
Dear friend
i am using e700 samsung mobile, i got the serial cable with this pack. but, i don't have serial port on my laptop. i checked all the message from this form. please help me out. i want right drivers for this, please tell where can i down load drivers , help me help me please
thanks
a c prasad
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Wed May 05, 2004 1:09 pm |
|
If you have a serial cable you don't need any drivers you only need the hardware in you computer.
|
