| Author |
Message |
FlasHie1986
Posts: 14
Phone Model:
Samsung E710
Service Provider:
NL Vodafone |
 
Fri Apr 16, 2004 6:46 am |
Now i`m trying to backup my fireware so i can begin flashing. My steps:
* Removing battery
* Put it back after 5 sec
* Than plug in the cable
* Start Optiflash
-> choose gsm: E710
-> choose com port
-> remove the backup range
-> add new backup range: 0x00000000 - 0x00001fff and 0x00004000 - 0x00ffffff
-> push button flash.
Than i get this:
I E1 12:34:07 OptiFlash 3.6.0.5 started!
I E2 12:34:07 Preferences section [Samsung] selected!
I E3 12:43:41 ThreadGUI started
I E4 12:43:41 ThreadProtocol started
I E5 12:43:41 Boot loader protocol type: passive
I E6 12:43:41 Flash loader: T:\Opti3.6\Models\sceptre3_sgh_hw6.sre
I E7 12:43:41 Opened COM3 at 115200 baud
I E8 12:43:41 Opened COM1 at 115200 baud
I E9 12:43:41 PC transfer speeds (COM3): 57600 115200 230400 460800 921600
I E10 12:43:41 PC transfer speeds (COM1): 57600 115200
I E11 12:43:41 Loading S-record file: <T:\Opti3.6\Models\sceptre3_sgh_hw6.sre>, RangeCheck=Off
I E12 12:43:41 There is 1 memory region in the S-record file:
I E13 12:43:41 1: 0x00000000 - 0x00004a5b = 19036 Bytes
I E14 12:43:42 SendFile=T:\Opti3.6\Models\sceptre3_sgh_hw6.sre, Mode=3
I E15 12:43:42 Hit On/Off Botton
Than i push my on/off button and he begins flashing:
loading ram1/1 (0% -> 100%)
"reading flash..." for a while till 100% (about 1800 messages: +/- I E1800)
than @ 100% i my computers resets. But the first time with the P3 1000 MHz i got blue screen.
I get the problem on both my computer:
P3 1000 MHz with Win XP PRO with service pack 1 and 384mb ram
and a P4 2.26 MHz with Win XP PRO with service pack 1 and 768 mb ram
what am i doing wrong?
|
 |
Advertisement
|
|
|
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Fri Apr 16, 2004 11:40 am |
|
Try putting the Second Com port on none also are you using optiflash 3.6.0.5?
|
|
FlasHie1986
Posts: 14
Phone Model:
Samsung E710
Service Provider:
NL Vodafone |
Fri Apr 16, 2004 4:33 pm |
oke i will try it but i dont think thats the problem because i have allready tried it i think..... and yes i am using the lastest version 3.6.0.5 of OptiFlash
ive tried with the P4, P3 and P4 laptop with Win2000Server.
|
|
FlasHie1986
Posts: 14
Phone Model:
Samsung E710
Service Provider:
NL Vodafone |
Fri Apr 16, 2004 6:33 pm |
Oke i found the problem:
I get blue screen @ backing-up my fireware for E710 at the end @ 100% when he wants to save.
Problem is the: ser2pl.sys(USB to SERIAL), thats also the what the blue screen displays.
I have search at google.com and i found out that more people has the same problem with the usb datacable (i use MA-8220). One guy said that the ser2pl.sys is not compatible with Win2k and XP because he tried it on both OS. I also tried it on Win2k server and XP Pro.
I hope that someone can help me please.
|
|
ceevee
Posts: 1 |
Sat Apr 17, 2004 12:42 am |
I am referring to the USB cable for the E715 from daydeal.com. Here is the USB Cable link that I am talking about http://www.daydeal.com/sams300/usbdatacable.htm
This solution may be for you if 1) you have outdated drivers included on the CD that came with the USB Cable OR 2) you have the cable, but don't have the drivers.
With the drivers included, flashing and using EasyGPRS was not a problem. However, backing up the firmware from the E715 caused a blue screen of death (BSOD) / reboot. If you look at the blue screen before the reboot, it states that there is a conflict with the ser2pl.sys driver, which caused the bsod.
Prolific is the name of the company which makes the drivers. I downloaded the updated USB to Serial Driver, which can be found here at their homepage, http://tech.prolific.com.tw/visitor/v_welcome.asp OR at the direct link here: http://tech.prolific.com.tw/visitor/fcabdl.asp?fid=29457078
I downloaded the wd_pl-2303.zip. It worked for me. However there are several other drivers, of which I never tried.
To get to what I'm talking about from the homepage:
From the homepage, click the Download tab on the left hand side. There is a drop down list near the bottom of the page next to "select a file category." I chose "Drivers for Windows" Click Go next to "Browse Files:" The drivers I am referring to are under the category "PL-2303 USB to Serial Bridge Controller." Again, I download the file called wd_pl-2303.zip, and it worked, so you can try that.
Just install and reboot. I'm not sure but you may have to unplug the USB cable, wait, then plug it back in. For reference I used Optiflash 3.6.0.5.
|
|
FlasHie1986
Posts: 14
Phone Model:
Samsung E710
Service Provider:
NL Vodafone |
Sat Apr 17, 2004 12:35 pm |
|
hey ceevee, i allready found that site yesterday and its works! But tnx anyway!!!
|
