| Author |
Message |
mrgristle
Posts: 3
Phone Model:
Samsung E700
Service Provider:
T-mobile |
 
Wed May 05, 2004 1:11 pm |
My mate bought a serial cable for his E700, and successfully unlocked his fone with it. He then went on to experiment with flashing the phone. He explained to me that he tried to back it up, but it failed, and now the phone wont even turn on. I have tried fixing it myself using info on this forum, but to no avail.
When i start downloader 3.3, i select com port, speed, and files, and when i hit start it tells me to turn phone on. When i turn phone on, i instantly get the message:
BOOT : Problem with program in external RAM : StackPointer not set
does anyone have any ideas? any help would be much appreciated
|
 |
Advertisement
|
|
|
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Wed May 05, 2004 3:16 pm |
|
Failing to backup is not suppose to kill your phone. Did you removed the batt for a few secs before trying to start your phone?
|
|
mrgristle
Posts: 3
Phone Model:
Samsung E700
Service Provider:
T-mobile |
Thu May 06, 2004 5:58 am |
|
yeah, ive left the battery out for a while, but its still dead. i think he meant to back it up, but accidentally flashed it or something.
|
|
ChinaCarl
Posts: 1
Phone Model:
E700
Service Provider:
China Telecom |
Thu May 06, 2004 8:39 am |
Hello
Have you performed "NAND Format" before you press start?
I successfully flashed my E700 today with the steps below, I was using a USB data cable.
Connected phone to cable, no SIM inserted and power off
Started Downloader (SGH-E700 Downloader Ver 3.3.EXE), selected speed 115200, comport, mode "Bin&NAND, and the FW files to download
Pressed "NAND Format" and turned on the phone when prompted, after a moment I got some message saing it was OK.
Disconnected the phone from the cable and removed the battery.
Restored battery and connected the cable, pressed "Start" and turned on the phone when prompted, now the flash process started
/Carl
|
|
mrgristle
Posts: 3
Phone Model:
Samsung E700
Service Provider:
T-mobile |
Thu May 06, 2004 12:42 pm |
thanks for the reply carl, but that doesnt work either. I always get the same error:
BOOT : Problem with program in external RAM : StackPointer not set
I think something really fundamental needs reseting to get it going again. Does anyone know of any tools that can do that kind of stuff?
thanks, Matt
|
|
Maxblast
Posts: 3
Phone Model:
E700A |
Fri May 07, 2004 12:05 pm |
| ChinaCarl wrote: | Hello
Have you performed "NAND Format" before you press start?
I successfully flashed my E700 today with the steps below, I was using a USB data cable.
Connected phone to cable, no SIM inserted and power off
Started Downloader (SGH-E700 Downloader Ver 3.3.EXE), selected speed 115200, comport, mode "Bin&NAND, and the FW files to download
Pressed "NAND Format" and turned on the phone when prompted, after a moment I got some message saing it was OK.
Disconnected the phone from the cable and removed the battery.
Restored battery and connected the cable, pressed "Start" and turned on the phone when prompted, now the flash process started
/Carl |
Hi ChinaCarl,
I quite new to this SGH-E700 Downloader Ver 3.3. How do i backup my firmware before i flash any firmware or java games to my E700A. I not so sure how to use downloader Ver 3.3 it as there are not much detail instruction on the forum.
If possible, can u email to me at payroll88sg@yahoo.com.sg
Thanks
Cheers
|
|
amendo_nl
Posts: 2
Phone Model:
Samsung E700
Service Provider:
T-Mobile |
Fri May 07, 2004 12:26 pm |
Hi,
i've got exactly the same problem
What's your firmware and Hardware version? (*#9999#)
Mine is:
PE700.05
E70BOWI3
[edit]
I've made a screenshot of the error, maby someone can help us?
I have an USB cable with charger, it works if i backup firmware, or use pim to upload/download photo's or ringtones.
Image
[/edit]
|
|
amendo_nl
Posts: 2
Phone Model:
Samsung E700
Service Provider:
T-Mobile |
Sat May 08, 2004 8:46 am |
Ok,
I found the solution!!!!
Do you see the difference with the downloader above? It sayz E700 Flasher, mine sayz Downloader v3.3, so don't use the software i used but use the Downloader v3.3
important!
After step 5 you'll have to plug in your USB cable. Not before step 5, not after step 5.
The take your phone, release the battery, plug you're phone in the USB cable, put battry back in, and go to Step 6!
Image
I used a USB cable with charger in.
|
|
kopthis
Posts: 1
Phone Model:
samsung e700
Service Provider:
02 |
Fri Jul 23, 2004 3:19 am |
hi can any one tell me where i can get more info on how samsung flasher downloader ver 3.3 work,s thanks , can not get mine to work many thanks???? 
|
|
movenonup
Posts: 2 |
Wed Aug 04, 2004 9:14 am |
|
yeah i have the same problem, my e-700 will not turn on at all... and when i try to flash it it says... ' turn phone on ' then about 5 seconds later ' time out ' apears..... please HELP
|
