Samsung x426 Unlock code

Does anyone know the unlock code for the new samsung x426.
The provider is AT&T.
Thanks

u have to enter 00000000 because thats the defualt code when theres no code entered hope this helps

That isn't the unlock code. That is the security code default

If yo guys are still having problems unlocking a samsung X426 any firmware version, please email me at bobbynoo1@hotmail.com and I will get it done for you.

Thanks.

Harry

Last edited by roswell108 on Mon Oct 11, 2004 6:41 am, edited 1 time in total

Unlocking:

If you have Rev 1.5 (x426) or earlier and most older models
Use the *#9998*3323# Trick (look for it on the forum)
The *#1111*WHATEVER# code will NOT work

If you have Rev 1.6 (x426) or later and most newer models
You MUST use unlocking software. Codes WILL lock your phone FOREVER

Locked: Return for Servicing

There is only 1 working solution, you must flash a copy of the firmware that is not in the locked status. (Most) Unlocking programs will NOT disable this issue, and your service provider cannot give you a code

If you do not plan to use your phone with another service provider, there is no real point to unlocking your phone other than to sell it. If you don't need to unlock it, don't take the risk of disabling the phone altogether

The *#9998*3323# Method:

1. If you have changed your phone password, change your password back to the default 8 zeros (00000000).
2. Put a SIM card that is from a network other than the one your phone is locked to
3. When Incorrect SIM error comes up, type *#9998*3323#.
4. White screen will appear with an exit option. Press the right softkey.
5. From the menu that appears, select the Malloc Fail option. This will reboot the phone and the normal service screens will appear.
6. Type *0141# and then press the green call key. "Personalization" or "Personalized" will appear.
7. Turn off your phone and put the original SIM back in.
8. Turn on your phone. You will receive a prompt to enter a password.
9. Type 8 zeros (00000000)
10. Completed. You have now unlocked your phone.

Hello, I just followed your instructions on how to unlock my Samsung x426 and everything seemed to work fine. After entering *0141# it said "personalized", but it didn't ask me for a password. Also, now if I were to type *0141# it says "already personalized". I'm looking to sell this phone and I want to be sure it's unlocked so I can sell it as such to get more money.

Also, will it always say "Rogers" when you turn it on or does it depend on which provider the SIM card is from?

Thanks

Personalized usually means that the phone is locked. You want to take another sim and place it in your phone and make sure it starts up and does not say invalid sim. Rogers is displayed if you have a rogers sim in, that is why you have to make sure it accepts the sim of another service like t-mo or cingular

So, if I go through the unlock process again (*#9998*3323# then select mallov fail); then I should probably not do the *0141#, it wouldn't be personalized which I'm guessing also means it wouldn't be locked??? I'm assuming that personalized=locked?

BTW: I'm doing all of this with the sim card in the phone... is that the right thing to do?

Thanks

No, you need a second sim. You enter the malloc fail, put in the "wrong sim" and it will ask for a password enter 00000000, then you do the 0141

how do i find out what firmware version mine is?? can some1 help me? im willing to pay the person through paypal who ever helps me out in unlocking

Samsung x426 Unlock code

Similar Topics

New Samsung Cell Phones

Subscribe to Our Feed

Carriers Talk

Manufacturers Talk

Mobiledia Community