| Page 22 of 50 |
 |
| Prev 1 ... 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 ... 50 Next |
|
|
|
| Author |
Message |
ZuljiN
Posts: 8
Phone Model:
Samsung E700
Service Provider:
Telia DK |
 
Sun Jul 25, 2004 6:34 pm |
| -= Don =- wrote: | | What happens if you flash BIN only? |
This :
Problem : Error acknowledge during the sector donwload
** Update : Tried NAND format, and then flash: TFS Start ERROR : 200(0xc8)
** Update2 : Tried another firmware, same procedure: TFS Start ERROR : 211(0xd3)
Arent there aint som sort of error index somewhere for downloader 3.3 ?
** Update3 : Now i tried first the Bin, and afterwards the NAND. Worked 100% good, but unfortunately, still no signal, and only 2 languages ( i knew that already ) , none of them are danish. And tunes are still very wierd... Like scratching, some of the tunes wont even play, all you feel is the vibrator going on and on...
** Update4 : So, now i tried the original flash, it wouldn't with Bin & NAND, but tried the Bin only, and it completed. Answer af your question anyhow  Will try for the NAND Only now.
** Update5 : NAND only went just smooth. But now it's just like when i got it, no signal, and fucked up tunes once more. Is it even possible that it is because of the firmware? Right now, i think it's a wasted phone actually. But my friend told me it got fucked when he tried to reflash it. Should i believe him now ?  It was originally german...
|
 |
Advertisement
|
|
|
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Mon Jul 26, 2004 11:10 am |
|
Don't believe him. Are you flashing your phone with the same firmware that was on your phone before cause that could be your problem.
|
|
ZuljiN
Posts: 8
Phone Model:
Samsung E700
Service Provider:
Telia DK |
Mon Jul 26, 2004 11:30 am |
| -= Don =- wrote: | | Don't believe him. Are you flashing your phone with the same firmware that was on your phone before cause that could be your problem. |
Okay.. Well, tomorrow i will get my money back, and he will have the phone again.
I flashed with 2 different firmwares, that i found in here, on mobiledia.com
Kent X's modded e700 firmware, English And Deutsch i think it was, and the E70XBWJ7, Which is an normal firmware. Just spoke to my bigbrother, he has the original danish E700. His firmware is E70XBWL7, should i try with his ?
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Mon Jul 26, 2004 1:36 pm |
|
Try it.
|
|
joker
Posts: 3
Phone Model:
D410 |
Tue Jul 27, 2004 10:42 am |
can someone please tell me the EXACT memory ranges of the SGH-D410 firmware WITHOUT ANY user data? the 2 ranges pre-set in optiflash are wrong (they are too large) and the additional range posted by don in the first thread is also too large. with all the 3 ranges my firmware .sre file has 96 mb which is way too large.
btw i successfully removed the camera sounds from the D410!
|
|
sasa
Posts: 3
Phone Model:
v200
Service Provider:
t-mob |
Tue Jul 27, 2004 6:29 pm |
|
I've used Optiflash 3.6 but after i installed a mod my phone can't turn ON...what could be the problem?
|
|
sasa
Posts: 3
Phone Model:
v200
Service Provider:
t-mob |
Tue Jul 27, 2004 6:30 pm |
|
My phone is a samsung v200 with the newest firmware...
|
|
ZuljiN
Posts: 8
Phone Model:
Samsung E700
Service Provider:
Telia DK |
Tue Jul 27, 2004 7:59 pm |
| sasa wrote: | | I've used Optiflash 3.6 but after i installed a mod my phone can't turn ON...what could be the problem? |
Just had same problem, but i found out my battery was drained after 1 flash... i dont know how. But i recharged it a little bit, until i could flash once more, and since, i tried flashing 3 times on full battery, and it's still full... But it's at your own risk if you do anything. I suggest, wait for Don.
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Tue Jul 27, 2004 8:59 pm |
| joker wrote: | can someone please tell me the EXACT memory ranges of the SGH-D410 firmware WITHOUT ANY user data? the 2 ranges pre-set in optiflash are wrong (they are too large) and the additional range posted by don in the first thread is also too large. with all the 3 ranges my firmware .sre file has 96 mb which is way too large.
btw i successfully removed the camera sounds from the D410! |
How big is your chip? in Mbits. The ranges can't be to large, too smal maybe cause i don't think that samsung put a chip smaller the 128Mbit in the D410.
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Tue Jul 27, 2004 9:02 pm |
| ZuljiN wrote: | | sasa wrote: | | I've used Optiflash 3.6 but after i installed a mod my phone can't turn ON...what could be the problem? |
Just had same problem, but i found out my battery was drained after 1 flash... i dont know how. But i recharged it a little bit, until i could flash once more, and since, i tried flashing 3 times on full battery, and it's still full... But it's at your own risk if you do anything. I suggest, wait for Don. |
What ZuljiN said  But after you've reflashed your phone with a good firmware don't flash the mod cause maybe that mod wasn't made for the firmware you flashed it on.
|
| | |
|
|
Prev 1 ... 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 ... 50 Next |
|
| Page 22 of 50 |
|
Home > Cell Phone Forums > Manufacturers Talk > Samsung Talk > Samsung Firmware and Flashing > Firmwares & Flashers - Part 2 |
|
|
|
