It's a data link cable (com port) with the option to switch between "Data" and "D/L"... i've used it to flash earlier models before... cannot be used for D600?
Thanks!
The D600 uses a different cable.
Advertisement
lucky644 Posts: 15
Phone Model: Samsung SGH-x426
Service Provider: Rogers Wireless
Sun Oct 30, 2005 3:51 pm
lucky644 wrote:
I have a Samsung x426 rev 1.7 with rogers in BC. I need to unlock my phone to open a new account (also with rogers)
I do not have another SIM card, so what method would I have to go through to unlock..?
I have a USB cable that goes on com 4 that I use for transferring ringtones/wallpapers etc, but I do not know if I can use it I keep hearing about serial unlocker cables..
Well, I got Cerberos unlocker 1.5 and set the port of my usb cable to 1, it claims it unlocked but I'm doubtful, I don't have another sim (from another company) to test.
~ Don ~ Posts: 2007
Phone Model: Samsung D900 FW: D900XAFI1
Service Provider: NL KPN
Sun Oct 30, 2005 3:53 pm
lucky644 wrote:
I have a Samsung x426 rev 1.7 with rogers in BC. I need to unlock my phone to open a new account (also with rogers)
I do not have another SIM card, so what method would I have to go through to unlock..?
I have a USB cable that goes on com 4 that I use for transferring ringtones/wallpapers etc, but I do not know if I can use it I keep hearing about serial unlocker cables..
I have a Samsung x426 rev 1.7 with rogers in BC. I need to unlock my phone to open a new account (also with rogers)
I do not have another SIM card, so what method would I have to go through to unlock..?
I have a USB cable that goes on com 4 that I use for transferring ringtones/wallpapers etc, but I do not know if I can use it I keep hearing about serial unlocker cables..
Been there, read that, done the cerebos instructions, phone did not indicate it was actually unlocked.
~ Don ~ Posts: 2007
Phone Model: Samsung D900 FW: D900XAFI1
Service Provider: NL KPN
Sun Oct 30, 2005 4:19 pm
lucky644 wrote:
~ Don ~ wrote:
lucky644 wrote:
I have a Samsung x426 rev 1.7 with rogers in BC. I need to unlock my phone to open a new account (also with rogers)
I do not have another SIM card, so what method would I have to go through to unlock..?
I have a USB cable that goes on com 4 that I use for transferring ringtones/wallpapers etc, but I do not know if I can use it I keep hearing about serial unlocker cables..
Been there, read that, done the cerebos instructions, phone did not indicate it was actually unlocked.
http://www.schwantz-i.com Downloads/Samsung try SUS 1.0 first. If none of them work it might be the cable.
Singapore21 Posts: 5
Phone Model: D600
Service Provider: Singtel
Tue Nov 01, 2005 1:08 am
~ Don ~ wrote:
Singapore21 wrote:
It's a data link cable (com port) with the option to switch between "Data" and "D/L"... i've used it to flash earlier models before... cannot be used for D600?
Thanks!
The D600 uses a different cable.
Oh shucks.. can i use the USB cable that came with it?
~ Don ~ Posts: 2007
Phone Model: Samsung D900 FW: D900XAFI1
Service Provider: NL KPN
Tue Nov 01, 2005 9:33 am
Maybe, Turn the phone off and try *+ON/OFF with that cable plugged in.
waterboy Posts: 1
Phone Model: E700
Service Provider: T-Mobile
Wed Nov 02, 2005 5:24 pm
Hello Don,
Ive bought a serial cable for my e700 that you stick a battery on, and i downloaded the UK firmware that you mentioned for the uk half way through this Part 2 thread (good grief, it took hours to wade through it all!). Firmware E70XADA1
Im trying to flash my e700 as the cameras gone a bit nutty doing the white screen when you take pictures and freezing although when you press the camera when its closed you can see it works.
I followed the instructions using downloader 3.3 and the firmware but it does about 2 per cent and comes up with:
TFS Start Error 204(0xcc)
In the box at the bottom it reads:
Download Binary sector by sector
Download TFS sector by sector
Starting TFS OGM Downloading
Unknowack
Help an idiot out and tell me what im doing wrong please?
shany Posts: 17
Phone Model: x426
Service Provider: samsung
Thu Nov 03, 2005 7:05 pm
i tried flashing x426 using opti flash it was all going right ..i press on of button when it says Hit on/of and it start progressing and said Loading flash but it gives error.
Err__Too_Many_Retries
And after that my phone is all black..its not turning on..I am i[set about that can any one help please..i did'nt take the backup of my firmware as well
i was using usb data cable..thanksssssss
Sc0rPi0n Posts: 4
Phone Model: Old: SGH - E700 (reflashed with E70XADA1), Samsung SGH-E760. Now: Nokia 6233 fw 5.60
Service Provider: NL KPN
Fri Nov 04, 2005 4:20 am
After reading here, i desided that i wanted to flash my e700 with a brandless version. SW version was E70BOWK2 (T-mobile) i reflashed it succesly with E70XADA1.
It was in my opinion quiet simple with downloader 3.3 and the PCEB133 cable.
Now i'm rid of the T-mobile software and i've got a real Samsung E700
View more 
