| Author |
Message |
monkey_dlee
Posts: 2
Phone Model:
Samsung x426
Service Provider:
AT&T WS |
 
Sun Jun 13, 2004 10:49 am |
I get an cmd Eras Failed exactly at the same sector 269, with 1.5 backup and 1.6 firmware. Hope someone can help me out.
I E1 11:42:18 PM OptiFlash 3.6.0.6 started!
I E2 11:42:18 PM Preferences section [Samsung] selected!
I E3 11:46:13 PM ThreadGUI started
I E4 11:46:13 PM ThreadProtocol started
I E5 11:46:13 PM Boot loader protocol type: passive
I E6 11:46:13 PM Flash loader: D:\Samsung\Opti3.6\Models\SGH-X42x.sre
I E7 11:46:13 PM Opened COM1 at 115200 baud
I E8 11:46:13 PM PC transfer speeds (COM1): 57600 115200
I E9 11:46:13 PM Loading S-record file: <D:\Samsung\Opti3.6\Models\SGH-X42x.sre>, RangeCheck=Off
I E10 11:46:15 PM There is 1 memory region in the S-record file:
I E11 11:46:15 PM 1: 0x00000000 - 0x00004a6b = 19052 Bytes
I E12 11:46:15 PM Loading S-record file: <F:\Save.sre>, RangeCheck=On
I E13 11:46:15 PM There are 2 memory regions in the S-record file:
I E14 11:46:15 PM 1: 0x00000000 - 0x00001fff = 8192 Bytes
I E15 11:46:15 PM 2: 0x00004000 - 0x00ffffff = 16760832 Bytes
I E16 11:46:15 PM SendFile=D:\Samsung\Opti3.6\Models\SGH-X42x.sre, Mode=3
I E17 11:46:15 PM Hit On/Off Botton
I E18 11:46:15 PM TalkToBootloader (using COM1)
I E19 11:46:15 PM Talking to passive bootloader
I E20 11:47:21 PM Bootloader V2.2 using UART1
I E21 11:47:21 PM ROM mask ID: 0x00004545 ( EE)
I E22 11:47:21 PM ID register: 0x000203bc (Trident II)
I E23 11:47:21 PM Bootloader type: 3
I E24 11:47:21 PM Max. transfer size: 2176 bytes
I E25 11:47:21 PM Send: 0x00000000 - 0x000007ff (=2048)
I E26 11:47:21 PM Send: 0x00000800 - 0x00000fff (=2048)
I E27 11:47:21 PM Send: 0x00001000 - 0x000017ff (=2048)
I E28 11:47:22 PM Send: 0x00001800 - 0x00001fff (=2048)
I E29 11:47:22 PM Send: 0x00002000 - 0x000027ff (=2048)
I E30 11:47:22 PM Send: 0x00002800 - 0x00002fff (=2048)
I E31 11:47:22 PM Send: 0x00003000 - 0x000037ff (=2048)
I E32 11:47:22 PM Send: 0x00003800 - 0x00003fff (=2048)
I E33 11:47:23 PM Send: 0x00004000 - 0x000047ff (=2048)
I E34 11:47:23 PM Send: 0x00004800 - 0x00004a6b (=620)
I E35 11:47:23 PM TalkToBootloader: OK
I E36 11:47:23 PM Duration: 1s
I E37 11:47:23 PM SendFile=F:\Save.sre, Mode=0
I E38 11:47:23 PM TalkToFlashloader (using COM1)
I E39 11:47:23 PM Switching over to flash loader
I E40 11:47:23 PM COM1 is connected to UART1
I E41 11:47:23 PM Sync'ing to flash loader
I E42 11:47:23 PM Querying device information
I E43 11:47:23 PM Flash loader version: V4.13
I E44 11:47:23 PM Max. TX/RX size: 65536/32768
I E45 11:47:23 PM Mobile transfer speeds: 57600, 115200, 230400, 460800
I E46 11:47:23 PM Detected flash chips: 2
I E47 11:47:23 PM 1: Manufacturer: 0x89, Device: 0x8855
I E48 11:47:23 PM 2: Manufacturer: 0x89, Device: 0x8854
I E49 11:47:23 PM 0x89/0x8855: Intel 28F640xW30, 64 Mbit (8 MB (8388608 Bytes) in 135 sectors)
I E50 11:47:23 PM 0x89/0x8854: Intel 28F640xW30, 64 Mbit (8 MB (8388608 Bytes) in 135 sectors)
I E51 11:47:23 PM Total flash size: 16 MB (16777216 Bytes) in 270 sectors
I E52 11:47:23 PM Port info:
I E53 11:47:23 PM Logical port 0: COM1 <-> UART1 at 115200 baud (~100%)
I E54 11:47:23 PM TalkToFlashloader: OK
I E55 11:47:23 PM There are no reserved regions defined
I E56 11:47:23 PM Data to be transferred: 15 MB (16769024 Bytes)
I E57 11:47:23 PM Setup
I E58 11:47:23 PM Sector: 0
I E59 11:47:23 PM OpenSector: 0, 0x00000000, 8192, 0x08
I E60 11:47:23 PM SendData: 0x00000000 - 0x00001fff
I E61 11:47:24 PM EraseSector: 0, 0x00000000, 8192, 0x00000000
I E62 11:47:24 PM CloseSector: 0
----------------------------------------
I E2157 12:19:26 AM Sector: 269
I E2158 12:19:26 AM OpenSector: 269, 0x00ff0000, 65536, 0x08
I E2159 12:19:26 AM SendData: 0x00ff0000 - 0x00ff3fff
I E2160 12:19:28 AM SendData: 0x00ff4000 - 0x00ff7fff
I E2161 12:19:29 AM SendData: 0x00ff8000 - 0x00ffbfff
I E2162 12:19:31 AM SendData: 0x00ffc000 - 0x00ffffff
I E2163 12:19:32 AM EraseSector: 269, 0x00ff0000, 65536, 0x00000000
I E2164 12:19:32 AM Cmd ERAS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E2165 12:19:32 AM Retry 1: EraseSector
I E2166 12:19:32 AM EraseSector: 269, 0x00ff0000, 65536, 0x00000000
I E2167 12:19:32 AM Cmd ERAS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E2168 12:19:32 AM Retry 2: EraseSector
I E2169 12:19:32 AM EraseSector: 269, 0x00ff0000, 65536, 0x00000000
I E2170 12:19:32 AM Cmd ERAS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E2171 12:19:32 AM Retry 3: EraseSector
I E2172 12:19:32 AM EraseSector: 269, 0x00ff0000, 65536, 0x00000000
I E2173 12:19:32 AM Cmd ERAS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E2174 12:19:32 AM Retry 4: EraseSector
I E2175 12:19:32 AM EraseSector: 269, 0x00ff0000, 65536, 0x00000000
I E2176 12:19:32 AM Cmd ERAS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E2177 12:19:32 AM Giving up on EraseSector
I E2178 12:19:32 AM SendFile: 14 (ERR_TOO_MANY_RETRIES)
I E2179 12:19:32 AM ReLoad: 14 (ERR_TOO_MANY_RETRIES)
I E2180 12:19:32 AM Error code: ERR_TOO_MANY_RETRIES
E E2181 12:19:32 AM Sorry, an error has occured ! (ERR_TOO_MANY_RETRIES)
I E2182 12:19:32 AM ThreadProtocol finished
I E2183 12:19:32 AM ThreadProtocol: 14
I E2184 12:19:32 AM ThreadGUI finished
|
 |
Advertisement
|
|
|
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Mon Jun 14, 2004 10:12 am |
|
Try 3.7.
|
|
monkey_dlee
Posts: 2
Phone Model:
Samsung x426
Service Provider:
AT&T WS |
Wed Jun 30, 2004 2:23 am |
|
Tried 3.7, but got an error about memory outside of range.
|
|
roswell108
Posts: 278
Phone Model:
Moto Razr Black (Nokia 6820b, Samsung x426 (x2) / x427M, SE T306, Nokia 3390, Moto v2282)
Service Provider:
Cingular (AT&T Wireless, T-Mobile, Voicestream) |
Fri Jul 09, 2004 5:50 pm |
|
No, 3.7 is invalid with an x426. You need the Optiflash version 3.6 Turn your erase slidebar in the options down to 1. Erase all reserved regions under flash and verify and uncheck any of the options such as extended protection (they are basically useless for what you intend to do). Then it should work. I w3as having the same issue. It was a bug in the programming and is harder to fix then just getting the newer program. It should be available in this forum under flashers and firmware. If you need firmware, also, feel free to PM me.
|
|
rexrc
Posts: 4
Phone Model:
Sansung X426
Service Provider:
ATT |
Wed Aug 04, 2004 3:54 pm |
I picked up my friend's Samsung X427 phone with Rev 1.7 on it and backuped up the firmware on the PC and I am trying to download that firmnware on my Samsung X426 with optiflash3.6.
It is loading in but it is giving these messages in the log for every sector it writes
"Verify Data: Detected Difference ( Some memory address != other memory address)
where the memore addresses are some hex numbers.
Will my X426 work ? If it doesn't work, what shall I do to make it with with the 1.7 flash ?
Also if you know where from exactly I can get the 1.6 flash for X426, please tell me.
rexrc
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Thu Aug 05, 2004 6:27 am |
Make a backup of your firmware and flash your friends 1.7. If your phone doesn't start flash your phone with your backup.
Also You don't have to verify cause its always going to be different if the firmwares where the same flashing would be a waste of time cause it wouldn't be a upgrade nor downgrade it would be a nonegrade.
|
|
manassas
Posts: 2
Phone Model:
SGH-x427
Service Provider:
Cingular |
Fri Nov 26, 2004 2:30 am |
| roswell108 wrote: | | No, 3.7 is invalid with an x426. You need the Optiflash version 3.6 Turn your erase slidebar in the options down to 1. Erase all reserved regions under flash and verify and uncheck any of the options such as extended protection (they are basically useless for what you intend to do). Then it should work. I w3as having the same issue. It was a bug in the programming and is harder to fix then just getting the newer program. It should be available in this forum under flashers and firmware. If you need firmware, also, feel free to PM me. |
I need SGH-X427.sre which is unlocked 
Hi,
I have a Samsung SGH - x427 Stucked with Cingular in USA.
IMEI: 0103310040739 ------ 4/3 04
Rev 1.7
X47UCDC1
I have a serial cable too.
You guys have any unlock software to share with me!
Pls send my e-mail : erhan_cal@yahoo.com
Thanks.
|
| | |
|
|
|
|
