| Author |
Message |
ducky
Posts: 12
Phone Model:
d410, e715 l2, v200 g1
Service Provider:
cingular |
 
Sat Jul 17, 2004 12:27 pm |
|
hi i recently got a 715, but i wanted to unlock it. it was on tmoblie and the unlock codes didnt work. so i flashed it to 710, wasnt sure exactly of which firmware to use so i used the most recent 1 E710XXDF3_byNMarco, but i tried the unlock codes and it still didnt work. please help me. i got the firmwares on fine but when i put in sim card it says falsh sumthing, like false sim card. im flashing it back to save file now, but please can any1 help me get a working new firmware onto my phone, and please help me unlock it too. thank you so much
|
 |
Advertisement
|
|
|
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Sat Jul 17, 2004 4:02 pm |
http://forums.mobiledia.com/topic14449.html
Try the codes under.
|
|
ducky
Posts: 12
Phone Model:
d410, e715 l2, v200 g1
Service Provider:
cingular |
Sat Jul 17, 2004 8:18 pm |
i tried the codes after the startup screen but it displays wrong code when i enter it. i tred all the codes on both my original firmware and the E710XXDF3.sre firmware and both dont work. please help me out with this. thanks again.
ps. i also tried the original v200 codes for after you flash it. with those codes i did get a restart but nothing worked for unlocking it. also what is the difference between 700 and 710?
S100 / S300 / V200 / V205 / E710 / E715 / D410
*2767*7822573738#
Enter the code above with an accepted sim card.
If the code above fails:
1.) Insert a SIM card which the phone does not accept
2.) If you see Wrong Card, type #9998*3323#
3.) Press exit and select number 7. Phone will reboot
4.) Now the SIM should work
5.) Type *0141# and then press call
6.) Power off phone and insert another SIM card
7.) If a code is requested, enter 00000000
S500 / P400 / E500 / E700 / X100 / X600 / E100
Enter *2767*3855# with an accepted SIM card
If this code fails, enter *2767*688# or #*7337#
|
|
ducky
Posts: 12
Phone Model:
d410, e715 l2, v200 g1
Service Provider:
cingular |
Mon Jul 19, 2004 7:37 pm |
fixed problem!
turns out there was an * before the code. so instead of using #9998*3323# all i had to do was put a * in front of it. but i had also encountered another problem, it would only work for 715 firmware, the two 710 firmwares i tired were unable to be unlocked. i saw sumwhere that i might need to use the ime code for unlocking it. hope it works
|
|
benz2006
Posts: 8 |
Tue Jul 20, 2004 11:41 pm |
| ducky wrote: | fixed problem!
turns out there was an * before the code. so instead of using #9998*3323# all i had to do was put a * in front of it. but i had also encountered another problem, it would only work for 715 firmware, the two 710 firmwares i tired were unable to be unlocked. i saw sumwhere that i might need to use the ime code for unlocking it. hope it works |
I see that you unlocked your phone, i have problem you had. when i entered the code i got wrong entry , when i entered *#9998-3323# and it said please press exit. What code did you use? How do you know that its unlocked?
THanks CHris
|
|
ducky
Posts: 12
Phone Model:
d410, e715 l2, v200 g1
Service Provider:
cingular |
Wed Jul 21, 2004 6:33 am |
from another phone flashing site. this worked for me and i hope it helps u
1. Insert the wrong sim card into the phone a message saying “wrong sim card” should appear on the screen. You can only make sos calls at this point.
2. Enter in the phone *#9998*3323#
3. You will now see the option exit on the left side of the phone. Hit the left soft key to exit.
4. Press the “7” key on the key pad. Your phone will now reboot. (turn off and turn on automatically.)
5. After the phone turns back on it will be unlocked to your sim card in the phone. TO finish unlocking the phone do the following
6. Enter *0141#
7. then hit the call button as if you were calling the above number. A small box saying “Personalized” will now appear.
8. Turn off your phone take off the battery and insert a different sim car then the one that was previously in the phone.
9. When you turn on the phone it will ask you for a “SIM unlock code” this number is “00000000” or 8 zeros.
10. Press ok and now your phone is unlocked to all carriers
11. To change your wap browser settings enter *2767*927# this will reset your wap browser then enter *#87927# and edit one of your profiles
|
|
bobbynoo1
Posts: 6 |
Mon Jul 26, 2004 12:59 pm |
|
Hi. I have a Samsung X426 locked with AT&T with Firmware version 1.6. Itried *#9998*3323# but it gives me a 3323 wrong entry error. I think the above reset code only works with version 1.5. If anyone can help me I would really appreciate it as I want to use this phone with my TMobile account. Thanks again.
|
