| Page 11 of 21 |
 |
| Prev 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 Next |
|
|
|
| Author |
Message |
NewV205User
Posts: 8
Phone Model:
Samsung V205
Service Provider:
T-Mobile |
 
Sat Aug 16, 2003 3:21 pm |
| MrQ wrote: | Ok here is the guide for flashing back i got from another forum.
If for some reason your operation wasn’t successful or you decide to go back to the V205 firmware follow the guide below.
If you backed up your V205 firmware you can use that or find some around other places.
Please follow the flashing to V200 guide but instead use the following steps for the corresponding numbers,
9) Click the tab “Flash&Verify”
10) Browse to find the file “V25UVVL2.s3” or whatever you named your firmware if you backed up the V205 firmware yourself.
Press the OK button to return to the main Optiflash screen.
Continue with the rest of the steps listed in the V200 flashing section of this guide.
Credits:
Guide written and procedure carried out by Chris Seward |
did all that and the phone will not power up after it is done
can some one tell me how to flash the phone back to the V205
|
 |
Advertisement
|
|
|
|
|
phil217
Posts: 1
Phone Model:
Samsung V205
Service Provider:
AT&T |
Sat Aug 16, 2003 6:04 pm |
|
HI I just flashed my phone. I have a Samsung V205 and I flashed it to V200. I unlocked it so I could use ATT GSM. Well, everything went fine but instead of it saying "ATT WIRELESS" it just says "Limited Service" and I can only make emergency calls like 911...Also If any of you have any software so I can change my IMEI # back to what it was that would be great. I am thinking because that my IMEI # is wrong that it says Limited Service. Thanks
|
|
furqan taher
Posts: 2
Phone Model:
Samsung V205 But want a V200
Service Provider:
T-Mobile |
Mon Aug 18, 2003 1:51 am |
hi,
where is the port or com and please help me through this process. 
thanks
furqan
|
|
matt
Posts: 1
Service Provider:
Telstra |
Mon Aug 25, 2003 3:57 am |
I have only just got my V200... which i only just found out that it was a V200c. i really want to send photos so i need to flash it right??? well i don't understand how to do that....
Also i can find out how to delete ringtones that i have put onto the phone, it won't let me overwrite them it says "Memory full"
thanks... 
|
|
newtocell
Posts: 2 |
Mon Aug 25, 2003 8:52 am |
|
what can i do to know if the phone is stright from the box. LIke the ## from the box that matches the phone. Can i press certain number to the phone and info come from the phone sayin the cereial number from the box?
|
|
domofon5
Posts: 2
Phone Model:
v205
Service Provider:
t-mobile |
Wed Aug 27, 2003 6:51 pm |
| MrQ wrote: | Ok here is the guide for flashing back i got from another forum.
If for some reason your operation wasn’t successful or you decide to go back to the V205 firmware follow the guide below.
If you backed up your V205 firmware you can use that or find some around other places.
Please follow the flashing to V200 guide but instead use the following steps for the corresponding numbers,
9) Click the tab “Flash&Verify”
10) Browse to find the file “V25UVVL2.s3” or whatever you named your firmware if you backed up the V205 firmware yourself.
Press the OK button to return to the main Optiflash screen.
Continue with the rest of the steps listed in the V200 flashing section of this guide.
Credits:
Guide written and procedure carried out by Chris Seward |
I trayed to go back my previous version (v205) - everythink was ok, but now I can't turn on the phone.
What Can I do ?
|
|
domofon5
Posts: 2
Phone Model:
v205
Service Provider:
t-mobile |
Wed Aug 27, 2003 8:25 pm |
| kzar wrote: | | Ibebeinb wrote: | | Now I have a more serious problem. I flashed to my saved v205 firmware. It seemed to work fine it flashed then said "all is well" However, now the phone will not come on at all. |
I had the same problem but like rwill80 said before set ur max speed for
ur com port to 115200 and flash it again it should work fine after that. |
More datails - I have the same problem but I can't flash the phone back to my saved firmware. When I click on the flash button, there the software says "power on mobile" - so I'm trying to posh power button but nothing is happeing...
Did you fixed this problem ?
|
|
v200
Posts: 19
Phone Model:
V200
Service Provider:
Vodafone AUS |
Wed Aug 27, 2003 11:40 pm |
| Charlie0369 wrote: | Hey MrQ,
i'm a newbie to this flashing stuff, so here goes....i bought the data cable from radio shack which the salesman said would work for the v205 also.....it fits and it's for the sprint samsung a310 phone. the plug works and everything, but when i go through the intial steps to pre-flash test, it will say "power on mobile" like it's not reading the phone i turn on the phone and wait and wait and the message is still there,by the way it is a USB cable...could that be the problem? I've tried the com1 and com2, and they both say that, anyother com gives an error message...do i have to but the actuall serial data cable?thanks for any help |
did you resolve this? I have the same problem, but I am using the OEM samsung cable!
|
|
nFiniteFx
Posts: 141
Phone Model:
Samsung SGH-D600
Service Provider:
Cingular |
Sun Aug 31, 2003 12:24 am |
|
When I flashed mine to V200 and when it says Power On Mobile. I just pressed the power button for about 1-2 secs. It won't turn on but that's how it's supposed to be. Then Optiflash starts flashing the phone.
|
|
olivas
Posts: 2
Phone Model:
Samsung SGH V205
Service Provider:
TIM |
Mon Sep 01, 2003 2:36 pm |
i'm really motivated to flash my V205 to V200, but I don't know what kind of networking problems I may have using this firmware here in Brazil.
Rgds
|
| | |
|
|
Prev 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 Next |
|
| Page 11 of 21 |
|
Home > Cell Phone Forums > Manufacturers Talk > Samsung Talk > Samsung Tutorials > HOW-TO: Upgrade V205 firmware to V200 |
|
|
|
