| Page 4 of 63 |
 |
| Prev 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 ... 63 Next |
|
|
|
| Author |
Message |
namie81
Posts: 5
Phone Model:
samsung sgh p510
Service Provider:
rogers |
 
Tue Oct 26, 2004 3:17 am |
um.. does anyone else have a unlock program for the samsung sph p510
thanks alot!!!!
|
 |
Advertisement
|
|
|
|
|
drawde
Posts: 20
Phone Model:
Samsung D500
Service Provider:
Rogers Wireless |
Tue Oct 26, 2004 1:09 pm |
| namie81 wrote: |
Thanks for the link, but I d/led the file but then when I try to run the exe, it says sqllib80.dll is missing.. also i'm just wondering if I need to install any drivers or anything else or if I was to get the exe working, all I have to do is plug in the cable? |
Oh, I don't know if you need any drivers or not. I never used the P510 unlocker but I used the D410 on the same site and all I did was install the software and it worked. Wish I could help you some more....sorry.
|
|
Sonu
Posts: 8
Phone Model:
x426
Service Provider:
AT T wireless |
Wed Oct 27, 2004 12:57 am |
Hi i hav a sam x426 rev 1.6.... i`ve been tryin to unlock with codes but it only locked the phone permanently.... now it says phone locked return for servicing... I dont wanna send to samsung and i dont see anyway to unlock it.. i even tried with the cable but it didnt work... does anyone know any other way to solve my problem.... i'd really appreaciate
Thanx
Sonu 
|
|
cellcorner
Posts: 26 |
Wed Oct 27, 2004 1:05 am |
|
cable sollution will help, make sure to use the right cable - t100 should work
|
|
Sonu
Posts: 8
Phone Model:
x426
Service Provider:
AT T wireless |
Wed Oct 27, 2004 1:06 am |
If phone says return for servicing... will it work with ATT wireless.... even though there is an error message... like if i try to sell it to the states (since there is no att wireless in canada)???
thanx 
|
|
Sonu
Posts: 8
Phone Model:
x426
Service Provider:
AT T wireless |
Wed Oct 27, 2004 1:09 am |
Hey thanx but from where do i get dat cable.. t100 ? and is it going to work with cambros?? i got dat program from a website (posted previously on this forum)... and any clue how to use it ? and how much the cable costs ?
tahnnxx !!!
|
|
cellcorner
Posts: 26 |
Wed Oct 27, 2004 1:31 am |
| roswell108 wrote: |
allka81 is incorrect! some of his codes can damage your phone.
Also, all models listed are not supported by the 3323 method.
|
3323 is not working on new sw version, but there are still people with old models and they might find it helpful. I personally unlocked a couple of hundred phones with this code, if it doesn't work, it doesn't work, nothing will happen with your phone. In this case you need to use cable.
As for other codes - never tried those but they say they work sometimes, use them with caution, EEPROM reset and CUSTOM EEPROM reset codes are potentially dangerous commands. Thanks for correcting me.
If you start trying codes you found somewhere on the internet without thoroughly studiyng the subject whos fault is that?
Learn. Read. Think.
good luck
allka81
|
|
roswell108
Posts: 278
Phone Model:
Moto Razr Black (Nokia 6820b, Samsung x426 (x2) / x427M, SE T306, Nokia 3390, Moto v2282)
Service Provider:
Cingular (AT&T Wireless, T-Mobile, Voicestream) |
Wed Oct 27, 2004 7:03 am |
So are you agreeing with me or trying to correct me and still agreeing by accident? While the 3323 is safe to test, a lot of codes out there don't work on every phone or even every phone they get listed for. They can lead to the infamous phone lock. I hate to tell you, but I get about 5-6 emails a day that say "i tried *#1111*00000000# and my phone says PHONE LOCKED: RETURN FOR SERVICING" which means that too many people are getting bad info. So if you want to answer these emails, feel free, but I prefer helping people now so I don't have to throw a rope when they get stuck in a ditch later.
In responce to selling a phone that is locked. That is SHADY! How would you feel if I sold you a car and told you you had to go get a dealership to make you new locks cuz there was no key, but I wasn't giving you any warranty either. A cable can be as cheap as $10 shipped if you know what you want.
|
|
Sonu
Posts: 8
Phone Model:
x426
Service Provider:
AT T wireless |
Wed Oct 27, 2004 12:48 pm |
SO ur telling me if i could get the t100 usb data cable i should be able to fix the "locked return for servicing" issue right ? with the cambros program.
Thanx
|
|
roswell108
Posts: 278
Phone Model:
Moto Razr Black (Nokia 6820b, Samsung x426 (x2) / x427M, SE T306, Nokia 3390, Moto v2282)
Service Provider:
Cingular (AT&T Wireless, T-Mobile, Voicestream) |
Wed Oct 27, 2004 5:14 pm |
|
No, cerebros may not solve that problem. That is just a long shot I suggest people try as a last resort for that specific problem. What you need to do is get a cable and flash a new firmware onto the phone.
|
| | |
|
|
Prev 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 ... 63 Next |
|
| Page 4 of 63 |
|
Home > Cell Phone Forums > Manufacturers Talk > Samsung Talk > IMPORTANT: Unlocking and Phone Locked Return.... |
|
|
|
