Hi all. I'm trying to flash my v400 but not having much luck. I have TRIPLETS_G_0B.09.45R_reflash.shx and SE6452AXXP10F9_V600_ME0.shx but when I run multiflashflex I get the following error: Cannot load the flash tool! Friendly Name: Flash Prog
Any ideas? thanks in advance!
ron
Advertisement
duceduc Posts: 2124
Phone Model: iPhone1G, 3G Unlocked
Service Provider: Softbank
Mon Oct 25, 2004 8:50 am
upon loading up mulitflashflex, do you see the phone load up down below where the grid lines are?
RMGA Posts: 14
Phone Model: Moto v400
Service Provider: Cingular
Mon Oct 25, 2004 8:54 am
duceduc wrote:
upon loading up mulitflashflex, do you see the phone load up down below where the grid lines are?
It goes through 3 pst framework loading or searching boxes and then gives me that error. I click OK and the program loads but when I select my flash file and click start I get: The application is not initialized! (Flash Tool/Super File)
duceduc Posts: 2124
Phone Model: iPhone1G, 3G Unlocked
Service Provider: Softbank
Mon Oct 25, 2004 8:56 am
You should be able to see you phone on that grid before it will work. I don't have the mulitflash flex up so I don't know the exact name. It seems the program is not detecting your phone.
RMGA Posts: 14
Phone Model: Moto v400
Service Provider: Cingular
Mon Oct 25, 2004 8:58 am
Phone is connected. mobile phone tools recognizes it. Is there another program to do this with? thanks for your help by the way!
Old_Fool Posts: 2214
Phone Model: If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider: ATT
Mon Oct 25, 2004 9:05 am
Use P2K in PST Flash and test command for the Flash shx file.
RMGA Posts: 14
Phone Model: Moto v400
Service Provider: Cingular
Mon Oct 25, 2004 9:13 am
tells me "security invalid" when starting..ugh!
Old_Fool Posts: 2214
Phone Model: If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider: ATT
Mon Oct 25, 2004 9:16 am
did you open PST first? then the Falsh testcommand?
RMGA Posts: 14
Phone Model: Moto v400
Service Provider: Cingular
Mon Oct 25, 2004 9:23 am
gives me error opening flash when opening pst. I give up for this morning
ok i think i know your problem...first off reply and let me know what version of pst you are using...if its 6.7 or 6.9 your problem might be you didnt install the patch...either that or you left one program open when trying to load PST Multiflashflex...
View more 
