HOW-TO: Flash / Flex Vxxx phones

Was this the only game you tried? The file may have been corupted.

ive tried about 4 or 5 different ones that worked FINE before i went and flashed / flexed...i dont understand.

thanks for responding by the way...

Never tried using p2ktool to upload games myself. Give midway a whirl.

ok thanks again, ill try and look around for it...maybe if you culd give me a hint is to where i may find it

. thanks again, ill keep you posted.

http://motoaide.com:8081/download.htm

sweet thanks, lovin this forum. I usually hang out at cellphonehacks.com but questions are rarely answerd over there. here within a few minutes. really do appreciate it.

ANYWAY...lol, i downloaded that and i tried to have a game sent to my phone but it says opening phone: TIME EXPIRED

I tried the only two ports that are available to me (all others says cannot open) 1,3 and neither work, says the same error. is this fixable?

thanks again.

PS. im gonna put on the general that this site is awsome, ill also mention you.

I would say check the com ports and make sure you check usb instead of serial. I don't have the software up so I am doing this by memory.

The phone and software is not seeing each other sounds like.
_____________________________________________________________
I have taken some steps out of this link. See if these make any sense.

http://forums.mobiledia.com/topic4398.html

Step 10
Start MIDway now. If you have started Midway before this step, you just screwed up! Hahaha...unplug your phone and start from Step 01.

Step 11
In MIDway, go to File>Settings>. In AT Command, type the following: AT

Step 12
In MIDway, to figure out which port to use, go to your Device Manager in your computer, look for the Motorola USB Modem>Properties> Advanced> Advanced Port Settings> and check out the COM Port Number. It should be ranging from 1-4, if not, move current devices which uses either these 4 ports to another COM Port. You must use either one of these COM ports because MIDway only works with COM 1 to COM 4. If you have problem with reallocating COM ports, try a solution search on Google. Whatever it is, it must be synchronize with MIDway's port setting later on.

Step 14
In Device Manager> Motorola USB Modem> Properties> Advanced> you should see the text box "Extra Settings". Type in the following: AT

Step 15
In MIDway, Using the COM port setting you got from Step 12, check the com port to use. Eg, if from Step 12, you found out you are using COM Port 3, then you should check the radio button for COM Port 3 in MIDway. The only error message you might get is "Can't Open Serial Port. Would you like to change MIDway settings?". You will only get this if the COM port you have selected is in use by other mysterious applications.

Step 16
In MIDway, once everything is setup, go to File> Open JAD. Select the JAD file to load. Make sure you check your JAD file's "MIDlet-Jar-URL" attributes is targeted to the JAR file on your computer, not some HTTP reference. You can open up a JAD file in Notepad to edit it.

Step 17.
In MIDway, do not use the Send AT Command, which I have seen quite a few instructions said you must send an AT command to get a "AT OK" message. I am not sure why, but whenever I did that, the JAD file cannot be loaded. So leave the "Send AT Command" alone for now. You will get a few error messages in this part:-
i) Connecting to the phone.... [Fail]
Your COM port settings could be wrong

ii) Connecting to the phone.... [TIMER EXPIRED]
Your COM port setting is correct, but you probably messed with the Send AT Command.

In both cases, download is cancelled, and you should start over again from Step 01...whoops.

Step 18
If you don't get any error commands, you should get a Download Alert on T720.

Step 19
Clap your hands and compliment yourself for this long-awaited victory.

Epilogue:

They can be many other tips/steps I have missed out, but the steps documented here is tried and worked. Make sure you follow EXACTLY what I have mentioned. "...the order is very important.. It's a little magic..."- Fcathala, forum member.

This documentation would not be possible with the help from posters in this forum, such as Kenetics, PorkTree Fcathala. All comments are welcome, you can email me at yow_chuan<(a)>yahoo.com for any doubts or questions on the procedures.

Signing off,
YC (testing another phone...)
_____________________________________________________________

well now see thats help. thank you. i will have to try those steps a few times because i just did it quickly and i still got the time expired. so i may have to read more. but thanks for finding that.

different question now...

will this flex work on the V265? I dont have this phone but my friend does and he wants this done (he seen what an improvement it did to my phone) and he wants the exact same things that I have.

I have the Triplets_G_0B.09.45R
I have the SE8605AXXU504D Flex (V3)

So will these work on a V265?

Thanks, oh and yes duceduc that trick did work, using MIDway. Thanks so much for finding that post for me. And this should be the last question unless, i run into trouble with the other phone...

hope not...and maybe i can contribute to this site alittle.

Phone_Hacker:

I am not sure about the V265 using triplets files to upgrade. Can you list his firmware on here?
* # 9999#

HOW-TO: Flash / Flex Vxxx phones

Similar Topics

New Motorola Cell Phones

Carriers Talk

Manufacturers Talk

Mobiledia Community