| Author |
Message |
Gamerke
Posts: 2
Phone Model:
SonyEricsson T310
Service Provider:
Mobistar |
 
Wed Jul 02, 2003 7:58 am |
I have a T310 an i recently bought a DCU-11 USB datacable to upload pics and sounds to my mobile phone. I have installed the drivers for the cable and downloaded some software from www.sonyericsson.com.
But when I plug in the phone Phone Monitor can't detect him.  I guess Phone Monitor isn't compatible with my T310? Can someone give me a link where I can download compatible drivers ?
Tnx in advance
|
 |
Advertisement
|
|
|
|
|
rhedgehog
Posts: 1
Phone Model:
T610
Service Provider:
Vodafone UK |
Wed Jul 02, 2003 9:00 am |
nothing to do with downloading any more drivers, the DCU-10 and 11 cables are compatible with all ericsson/sonyericsson phones since the T39!
Try this with the cable and phone connected -
check in device manager to see what com port the computer has assigned to the dcu-11 (it'll appear under ports as a com port). If it doesn't appear in here, and there is a USB device with a yellow ! next to it, delete it and remove and plug the cable back in it should now install properly.
go into phone monitor and on the com ports page, enable this com port, but DONT reserve it or it wont work.
then, to get the phone monitor to notice it, you'll most likely have to try synching the phone using the XTNDconnectPC that comes on the cd with the phone (not the cable - wrong software).
Phone connection wizard should appear and ask you to name the phone and the sim
once you have gone through this bit, you can use all the software without any problems.
|
|
Gamerke
Posts: 2
Phone Model:
SonyEricsson T310
Service Provider:
Mobistar |
Wed Jul 02, 2003 9:24 am |
The cable is installed good and the phone monitor is configured good BUT I don't have a CD with XTNDconnectPC. There wasn't a CD-ROM with the phone when I bought him.
EDIT: After a long time of trying it finally works
|
|
Calundann
Posts: 3
Phone Model:
SE T310
Service Provider:
Sonofon |
Wed Jul 02, 2003 3:16 pm |
I have the same phone and the same cable and I usually have to leave the phone plugged in the DCU - 11 cable for about 15 mins. before phone monitor detects it...
Is this normal ?
|
|
Kenarie
Posts: 2
Phone Model:
T310
Service Provider:
Vodafone |
Wed Jul 02, 2003 8:57 pm |
Where can I find that program called XTNDConnectPC? If someone could tell me please, cause I didn't get a cd when i bought my phone either. 
|
|
pierotofy
Posts: 2
Phone Model:
T310 |
Wed Aug 20, 2003 12:22 pm |
I've read and applied the replyies posted in this topics, but i can't connect the T310....... Gamerke, can you tell me what you had do to connect the phone????
Thanks for all.
|
|
daspaceman :O)
Posts: 1
Phone Model:
Sony Ericsson t310
Service Provider:
Vodafone (malta) |
Thu Aug 21, 2003 7:52 am |
Somewhere on this forum i read that the t310 and the dcu-11 cable are not compatible. Is this true? Has anyone connected the t310 through dcu-11 and using it as a mobile for internet on the pc@?
Thanks 
|
|
pierotofy
Posts: 2
Phone Model:
T310 |
Thu Aug 21, 2003 9:29 am |
After 7 heures of work, i found how to connect the phone. Using Phone Monitor, enable the com port, and with a program as "send file" send data from pc to phone. But is impossible to transfert data from phone to pc. Only with IrDA.
When you connect the phone, wait 1 min with the software open. Now the software identify the phone.
Bye!!
|
|
zeroGhost
Posts: 1
Phone Model:
t310
Service Provider:
Fido |
Sun Mar 14, 2004 5:40 pm |
Yep, i have the t310 and some aftermarket dcu-11 cable...
the drivers i install are the ones ive found online for them.. i dont know if theyre even right... under ports.. the cable is identified as.. "Susteen virtual comport" so im guessing its the wrong drivers...
anyone got any idea where i can get these drivers? i dont have the cd.. it didnt come wth a cd :\
thank in advance!
-Felix
|
|
Danny G
Posts: 1
Phone Model:
K700i
Service Provider:
O2 |
Sun Jul 17, 2005 2:48 pm |
| rhedgehog wrote: | nothing to do with downloading any more drivers, the DCU-10 and 11 cables are compatible with all ericsson/sonyericsson phones since the T39!
Try this with the cable and phone connected -
check in device manager to see what com port the computer has assigned to the dcu-11 (it'll appear under ports as a com port). If it doesn't appear in here, and there is a USB device with a yellow ! next to it, delete it and remove and plug the cable back in it should now install properly.
go into phone monitor and on the com ports page, enable this com port, but DONT reserve it or it wont work.
then, to get the phone monitor to notice it, you'll most likely have to try synching the phone using the XTNDconnectPC that comes on the cd with the phone (not the cable - wrong software).
Phone connection wizard should appear and ask you to name the phone and the sim
once you have gone through this bit, you can use all the software without any problems. |
Hi iam new here..I bought a DCU-11 data cable and I cant get my pc to find the drivers for it,Iam using XP Pro with P4...I followed all the step by step guide on this page and the bit where it says to look in divice manager and remove divice that has the big yellow ? and the! next to it and unplug the cable and put it back in again,I done all of that and my pc says New Hardware Detected then the New Divice Wizard pops up and i select the Install Software from a Floppy or a CD Rom then click next then this appaers.......
why? Ive installed the relevent software and I just cant seem to get it to work 
|
