E715 dead after flashing

I was trying to flash my E175 (tmobile) to the latest firmware using optiflash 4.12. as i followed the instructions it began to flash until i got an error. i thought maybe i needed an earlier version of optiflash since i've read issues w/ the more recent version and e715. so i d/led optiflash 3.6 and now my phone won't power on. it's completely dead. i tried switching batteries. nothing works. below is the log file for the attempted flash. please help.
I E1 15:55:36 OptiFlash 4.12 started
I E2 15:58:37 ThreadGUI started
I E3 15:58:37 ThreadProtocol started
I E4 15:58:37 OS: NT family, Ver:5.1
I E5 15:58:37 Platform: unknown or corrupted platform: "*** MAKE A BACKUP BEFORE YOU FLASH!!! ***"
I E6 15:58:37 ReLoad: 30 (ERR_BAD_PLATFORM)
I E7 15:58:37 Error code: ERR_BAD_PLATFORM
E E8 15:58:37 Sorry, an error has occured ! (ERR_BAD_PLATFORM)
I E9 15:58:37 ThreadProtocol finished
I E10 15:58:37 ThreadProtocol: 30
I E11 15:58:37 ThreadGUI finished
I E12 16:00:07 ThreadGUI started
I E13 16:00:07 ThreadProtocol started
I E14 16:00:07 OS: NT family, Ver:5.1
I E15 16:00:07 Boot loader protocol type: passive
I E16 16:00:07 Memory interface type: 0
I E17 16:00:07 Setup loader: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\Setup_loader1.sre
I E18 16:00:07 Setup loader base addr: 0x04000000
I E19 16:00:07 Flash loader: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre
I E20 16:00:07 Flash loader base addr: 0x00000000
I E21 16:00:07 Stack base addr: 0x00000000
I E22 16:00:07 Stack buffers: 2
I E23 16:00:07 0: 0x00000000 - 0x00ffffff [16 MB (16777216 Bytes)]
I E24 16:00:07 1: 0x01000000 - 0x01ffffff [16 MB (16777216 Bytes)]
I E25 16:00:07 Opened COM1 at 115200 baud
I E26 16:00:07 PC transfer speeds (COM1): 57600 115200
I E27 16:00:07 Loading S-record file (RangeCheck=Off)
I E28 16:00:07 File: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\Setup_loader1.sre
I E29 16:00:07 SRE line 178: IGNORING: S70504001000E6
I E30 16:00:07 There is 1 memory region in the S-record file:
I E31 16:00:07 1: 0x04001000 - 0x04001b03 = 2820 Bytes
I E32 16:00:07 Loading S-record file (RangeCheck=Off)
I E33 16:00:07 File: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre
I E34 16:00:07 SRE line 1179: IGNORING: S70500000000FA
I E35 16:00:07 There is 1 memory region in the S-record file:
I E36 16:00:07 1: 0x00000000 - 0x00004993 = 18836 Bytes
I E37 16:00:08 Loading S-record file (RangeCheck=On)
I E38 16:00:08 File: C:\Documents and Settings\Kelvin\Desktop\E715UVDC5.sre
I E39 16:00:08 SRE line 1: IGNORING: S00600004844521B
I E40 16:00:09 SRE line 1048066: IGNORING: S705A002000058
I E41 16:00:09 There are 2 memory regions in the S-record file:
I E42 16:00:09 1: 0x00000000 - 0x00001fff = 8192 Bytes
I E43 16:00:09 2: 0x00004000 - 0x00ffffff = 16760832 Bytes
I E44 16:00:09 SendFile=C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre, Mode=3
I E45 16:00:09 Power on mobile !
I E46 16:00:10 TalkToBootLoader (using COM1)
I E47 16:00:10 Talking to passive bootloader
I E48 16:00:53 SendFile: 3 (ERR_ABORT)
I E49 16:00:53 ReLoad: 3 (ERR_ABORT)
I E50 16:00:53 Error code: ERR_ABORT
E E51 16:00:53 Sorry, an error has occured ! (ERR_ABORT)
I E52 16:00:53 ThreadProtocol finished
I E53 16:00:53 ThreadProtocol: 3
I E54 16:00:53 ThreadGUI finished
I E55 16:00:56 ThreadGUI started
I E56 16:00:56 ThreadProtocol started
I E57 16:00:56 OS: NT family, Ver:5.1
I E58 16:00:56 Boot loader protocol type: passive
I E59 16:00:56 Memory interface type: 0
I E60 16:00:56 Setup loader: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\Setup_loader1.sre
I E61 16:00:56 Setup loader base addr: 0x04000000
I E62 16:00:56 Flash loader: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre
I E63 16:00:56 Flash loader base addr: 0x00000000
I E64 16:00:56 Stack base addr: 0x00000000
I E65 16:00:56 Stack buffers: 2
I E66 16:00:56 0: 0x00000000 - 0x00ffffff [16 MB (16777216 Bytes)]
I E67 16:00:56 1: 0x01000000 - 0x01ffffff [16 MB (16777216 Bytes)]
I E68 16:00:56 Opened COM1 at 115200 baud
I E69 16:00:56 PC transfer speeds (COM1): 57600 115200
I E70 16:00:56 Loading S-record file (RangeCheck=Off)
I E71 16:00:56 File: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\Setup_loader1.sre
I E72 16:00:56 SRE line 178: IGNORING: S70504001000E6
I E73 16:00:56 There is 1 memory region in the S-record file:
I E74 16:00:56 1: 0x04001000 - 0x04001b03 = 2820 Bytes
I E75 16:00:56 Loading S-record file (RangeCheck=Off)
I E76 16:00:56 File: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre
I E77 16:00:57 SRE line 1179: IGNORING: S70500000000FA
I E78 16:00:57 There is 1 memory region in the S-record file:
I E79 16:00:57 1: 0x00000000 - 0x00004993 = 18836 Bytes
I E80 16:00:57 Loading S-record file (RangeCheck=On)
I E81 16:00:57 File: C:\Documents and Settings\Kelvin\Desktop\E715UVDC5.sre
I E82 16:00:57 SRE line 1: IGNORING: S00600004844521B
I E83 16:00:58 SRE line 1048066: IGNORING: S705A002000058
I E84 16:00:58 There are 2 memory regions in the S-record file:
I E85 16:00:58 1: 0x00000000 - 0x00001fff = 8192 Bytes
I E86 16:00:58 2: 0x00004000 - 0x00ffffff = 16760832 Bytes
I E87 16:00:58 SendFile=C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre, Mode=3
I E88 16:00:58 Power on mobile !
I E89 16:00:59 TalkToBootLoader (using COM1)
I E90 16:00:59 Talking to passive bootloader
I E91 16:01:53 SendFile: 3 (ERR_ABORT)
I E92 16:01:53 ReLoad: 3 (ERR_ABORT)
I E93 16:01:53 Error code: ERR_ABORT
E E94 16:01:53 Sorry, an error has occured ! (ERR_ABORT)
I E95 16:01:53 ThreadProtocol finished
I E96 16:01:53 ThreadProtocol: 3
I E97 16:01:53 ThreadGUI finished
I E98 16:02:04 ThreadGUI started
I E99 16:02:04 ThreadProtocol started
I E100 16:02:04 OS: NT family, Ver:5.1
I E101 16:02:04 Boot loader protocol type: passive
I E102 16:02:04 Memory interface type: 0
I E103 16:02:04 Setup loader: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\Setup_loader1.sre
I E104 16:02:04 Setup loader base addr: 0x04000000
I E105 16:02:04 Flash loader: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre
I E106 16:02:04 Flash loader base addr: 0x00000000
I E107 16:02:04 Stack base addr: 0x00000000
I E108 16:02:04 Stack buffers: 2
I E109 16:02:04 0: 0x00000000 - 0x00ffffff [16 MB (16777216 Bytes)]
I E110 16:02:04 1: 0x01000000 - 0x01ffffff [16 MB (16777216 Bytes)]
I E111 16:02:04 Opened COM1 at 115200 baud
I E112 16:02:04 PC transfer speeds (COM1): 57600 115200
I E113 16:02:04 Loading S-record file (RangeCheck=Off)
I E114 16:02:04 File: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\Setup_loader1.sre
I E115 16:02:04 SRE line 178: IGNORING: S70504001000E6
I E116 16:02:04 There is 1 memory region in the S-record file:
I E117 16:02:04 1: 0x04001000 - 0x04001b03 = 2820 Bytes
I E118 16:02:04 Loading S-record file (RangeCheck=Off)
I E119 16:02:04 File: C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre
I E120 16:02:04 SRE line 1179: IGNORING: S70500000000FA
I E121 16:02:04 There is 1 memory region in the S-record file:
I E122 16:02:04 1: 0x00000000 - 0x00004993 = 18836 Bytes
I E123 16:02:04 Loading S-record file (RangeCheck=On)
I E124 16:02:04 File: C:\Documents and Settings\Kelvin\Desktop\E715UVDC5.sre
I E125 16:02:04 SRE line 1: IGNORING: S00600004844521B
I E126 16:02:06 SRE line 1048066: IGNORING: S705A002000058
I E127 16:02:06 There are 2 memory regions in the S-record file:
I E128 16:02:06 1: 0x00000000 - 0x00001fff = 8192 Bytes
I E129 16:02:06 2: 0x00004000 - 0x00ffffff = 16760832 Bytes
I E130 16:02:06 SendFile=C:\Documents and Settings\Attila\Desktop\Optiflash\Models\fl_sceptre3_nice_std_v24.sre, Mode=3
I E131 16:02:06 Power on mobile !
I E132 16:02:07 TalkToBootLoader (using COM1)
I E133 16:02:07 Talking to passive bootloader
I E134 16:02:18 Bootloader V2.2 using UART0
I E135 16:02:18 ROM mask ID: 0x00004545 ( EE)
I E136 16:02:18 ID register: 0x000203bc (Trident II)
I E137 16:02:18 Bootloader type: 3 (0)
I E138 16:02:18 Max. transfer size: 2176 bytes
I E139 16:02:18 Adjusted max. transfer size to: 1920 bytes
I E140 16:02:18 Data to transfer: 18836 bytes in 1 region(s)
I E141 16:02:18 Send: 0x00000000 - 0x0000077f (=1920)
I E142 16:02:18 Send: 0x00000780 - 0x00000eff (=1920)
I E143 16:02:19 Send: 0x00000f00 - 0x0000167f (=1920)
I E144 16:02:19 Send: 0x00001680 - 0x00001dff (=1920)
I E145 16:02:19 Send: 0x00001e00 - 0x0000257f (=1920)
I E146 16:02:19 Send: 0x00002580 - 0x00002cff (=1920)
I E147 16:02:19 Send: 0x00002d00 - 0x0000347f (=1920)
I E148 16:02:19 Send: 0x00003480 - 0x00003bff (=1920)
I E149 16:02:20 Send: 0x00003c00 - 0x0000437f (=1920)
I E150 16:02:20 Send: 0x00004380 - 0x00004993 (=1556)
I E151 16:02:20 TalkToBootloader: OK
I E152 16:02:20 Duration: 13s
I E153 16:02:20 SendFile=C:\Documents and Settings\Attila\Desktop\E715UVDC5.sre, Mode=0
I E154 16:02:20 TalkToFlashloader (using COM1)
I E155 16:02:20 Switching over to flash loader
I E156 16:02:20 COM1 is connected to UART0
I E157 16:02:20 Sync'ing to flash loader
I E158 16:02:20 Sync'ing
I E159 16:02:20 sync'ed
I E160 16:02:20 Querying device information
I E161 16:02:20 MSG: 0x0[0x1000000] 0xe0003024=0x10000d 0xe0003000=0x11054
I E162 16:02:20 MSG: 0x0[0x0] 0xe000302c=0x0 0xe0003008=0xc00f
I E163 16:02:20 MSG: 0x1000000[0x1000000] 0xe0003030=0x11000d 0xe000300c=0x1054
I E164 16:02:20 MSG: 0x0[0x0] 0xe0003034=0x0 0xe0003010=0xc00f
I E165 16:02:20 MSG: 0x0[0x0] 0xe0003038=0x0 0xe0003014=0xc00f
I E166 16:02:20 MSG: 0x0[0x0] 0xe000303c=0x0 0xe0003018=0xc00f
I E167 16:02:20 MSG: 0x0[0x0] 0xe0003040=0x0 0xe000301c=0xc00f
I E168 16:02:20 MSG: 0xe0003020=0xa6
I E169 16:02:20 Flash loader version: V5.08
I E170 16:02:20 Max. TX/RX size: 65536/32768
I E171 16:02:20 Mobile transfer speeds: 57600, 115200, 230400, 460800
I E172 16:02:20 IDs returned by detection: 2
I E173 16:02:20 AMD:0x89/0x88570000, Intel:0x89/0x88570000
I E174 16:02:20 AMD:0x89/0x88560000, Intel:0x89/0x88560000
I E175 16:02:20 Detected flash chips: 2
I E176 16:02:20 0x89/0x88570000: Intel 28F128W30B, 128 Mbit (16 MB (16777216 Bytes) in 263 sectors)
I E177 16:02:20 0x89/0x88560000: Intel 28F128W30T, 128 Mbit (16 MB (16777216 Bytes) in 263 sectors)
I E178 16:02:20 Total flash memory: 32 MB (33554432 Bytes) in 526 sectors on 2 chips
I E179 16:02:20 Port info:
I E180 16:02:20 Logical port 0: COM1 <-> UART0 at 115200 baud (~100%)
I E181 16:02:20 TalkToFlashloader: OK
I E182 16:02:20 There are no reserved regions defined
I E183 16:02:20 Data to be transferred: 15 MB (16769024 Bytes)
I E184 16:02:20 Setup
I E185 16:02:20 Sector: 0/0
I E186 16:02:20 VerifyData: 0x00000000 - 0x00001fff
I E187 16:02:20 VerifyData: Detected difference (0x674cc7b3 != 0xa597a81c)
I E188 16:02:20 OpenSector: 0/0, 0x00000000, 8192, 0x11
I E189 16:02:20 SendData: 0x00000000 - 0x00001fff
I E190 16:02:21 CloseSector: 0/0
I E191 16:02:21 Sector: 0/2
I E192 16:02:21 VerifyData: 0x00004000 - 0x00005fff
I E193 16:02:21 Sector: 0/3
I E194 16:02:21 VerifyData: 0x00006000 - 0x00007fff
I E195 16:02:21 Sector: 0/4
I E196 16:02:21 VerifyData: 0x00008000 - 0x00009fff
I E197 16:02:21 VerifyData: Detected difference (0x718af6fe != 0x85118226)
I E198 16:02:21 OpenSector: 0/4, 0x00008000, 8192, 0x11
I E199 16:02:21 SendData: 0x00008000 - 0x00009fff
I E200 16:02:22 CloseSector: 0/4
I E201 16:02:22 Sector: 0/5
I E202 16:02:22 VerifyData: 0x0000a000 - 0x0000bfff
I E203 16:02:22 VerifyData: Detected difference (0x375439f6 != 0xd9bb5b43)
I E204 16:02:22 OpenSector: 0/5, 0x0000a000, 8192, 0x11
I E205 16:02:22 SendData: 0x0000a000 - 0x0000bfff
I E206 16:02:38 WaitFor4CCs failed: ERR_TIMEOUT (6)
I E207 16:02:38 0x796c7072 = rply
I E208 16:02:38 0x67736d2a = *msg
I E209 16:02:38 0x706d642a = *dmp
I E210 16:02:38 WaitFor4CCs failed: 6
I E211 16:02:38 Retry 1: SendData
I E212 16:02:38 Sync'ing
I E213 16:02:43 WaitFor4CCs failed: ERR_TIMEOUT (6)
I E214 16:02:43 0x216e7973 = syn!
I E215 16:02:48 WaitFor4CCs failed: ERR_TIMEOUT (6)
I E216 16:02:48 0x216e7973 = syn!
I E217 16:02:53 WaitFor4CCs failed: ERR_TIMEOUT (6)
I E218 16:02:53 0x216e7973 = syn!
I E219 16:02:58 WaitFor4CCs failed: ERR_TIMEOUT (6)
I E220 16:02:58 0x216e7973 = syn!
I E221 16:03:03 WaitFor4CCs failed: ERR_TIMEOUT (6)
I E222 16:03:03 0x216e7973 = syn!
I E223 16:03:03 Failed to sync
I E224 16:03:03 Failed to sync
I E225 16:03:03 SendFile: 5 (ERR_PROTOCOL)
I E226 16:03:03 ReLoad: 5 (ERR_PROTOCOL)
I E227 16:03:03 Error code: ERR_PROTOCOL
E E228 16:03:03 Sorry, an error has occured ! (ERR_PROTOCOL)
I E229 16:03:03 ThreadProtocol finished
I E230 16:03:03 ThreadProtocol: 5
I E231 16:03:03 ThreadGUI finished

Here are a few suggestions:
- Try it with Optiflash 3.7.0.1.
- Try it on another computer.

- Which cable are you using?

i'm using the samsung OEM cable. i tried flashing but i need to turn the phone on/off before and now it's completely dead. will not turn on at all.

You don't have to turn the phone on to reflash it. Remove the battery than put it back after 3/5secs and Reflash it. Don't try to turn it on Before optiflash asks you to.

i just tried to remove the battery and put it back after 3-5 seconds. optiflash is still pending on hitting the on/off button.

alright, i got it to reflash but after a few minutes i got another error message.

I E1 11:10:34 AM OptiFlash 3.7.0.1 started!
I E2 11:10:35 AM Preferences section [Samsung] selected!
I E3 11:11:06 AM PC transfer speeds (COM1): 57600 115200
I E4 11:11:06 AM Loading S-record file (RangeCheck=Off)
I E5 11:11:06 AM File: C:\Program Files\OptiFlash\Models\Setup_loader1.sre
I E6 11:11:06 AM SRE line 178: IGNORING: S70504001000E6
I E7 11:11:06 AM There is 1 memory region in the S-record file:
I E8 11:11:06 AM 1: 0x04001000 - 0x04001b03 = 2820 Bytes
I E9 11:11:06 AM Loading S-record file (RangeCheck=Off)
I E10 11:11:06 AM File: C:\Program Files\OptiFlash\Models\fl_sceptre3_nice_std_v24.sre
I E11 11:11:06 AM SRE line 1202: IGNORING: S70500000000FA
I E12 11:11:06 AM There is 1 memory region in the S-record file:
I E13 11:11:06 AM 1: 0x00000000 - 0x00004b0f = 19216 Bytes
I E14 11:11:06 AM Loading S-record file (RangeCheck=On)
I E15 11:11:06 AM File: C:\Documents and Settings\Kelvin\Desktop\E715UVDC5.sre
I E16 11:11:06 AM SRE line 1: IGNORING: S00600004844521B
I E17 11:11:08 AM SRE line 1048066: IGNORING: S705A002000058
I E18 11:11:08 AM There are 2 memory regions in the S-record file:
I E19 11:11:08 AM 1: 0x00000000 - 0x00001fff = 8192 Bytes
I E20 11:11:08 AM 2: 0x00004000 - 0x00ffffff = 16760832 Bytes
I E21 11:11:08 AM Hit On/Off Button
I E22 11:13:36 AM Error code: ERR_ABORT
E E23 11:13:36 AM Sorry, an error has occured ! (ERR_ABORT)
I E24 11:13:44 AM PC transfer speeds (COM1): 57600 115200
I E25 11:13:44 AM Loading S-record file (RangeCheck=Off)
I E26 11:13:44 AM File: C:\Program Files\OptiFlash\Models\Setup_loader1.sre
I E27 11:13:44 AM SRE line 178: IGNORING: S70504001000E6
I E28 11:13:44 AM There is 1 memory region in the S-record file:
I E29 11:13:44 AM 1: 0x04001000 - 0x04001b03 = 2820 Bytes
I E30 11:13:44 AM Loading S-record file (RangeCheck=Off)
I E31 11:13:44 AM File: C:\Program Files\OptiFlash\Models\fl_sceptre3_nice_std_v24.sre
I E32 11:13:44 AM SRE line 1202: IGNORING: S70500000000FA
I E33 11:13:44 AM There is 1 memory region in the S-record file:
I E34 11:13:44 AM 1: 0x00000000 - 0x00004b0f = 19216 Bytes
I E35 11:13:44 AM Loading S-record file (RangeCheck=On)
I E36 11:13:45 AM File: C:\Documents and Settings\Kelvin\Desktop\E715UVDC5.sre
I E37 11:13:45 AM SRE line 1: IGNORING: S00600004844521B
I E38 11:13:46 AM SRE line 1048066: IGNORING: S705A002000058
I E39 11:13:46 AM There are 2 memory regions in the S-record file:
I E40 11:13:46 AM 1: 0x00000000 - 0x00001fff = 8192 Bytes
I E41 11:13:46 AM 2: 0x00004000 - 0x00ffffff = 16760832 Bytes
I E42 11:13:46 AM Hit On/Off Button
I E43 11:16:37 AM Flash loader version: V4.28
I E44 11:16:37 AM Mobile transfer speeds: 57600, 115200, 230400, 460800
I E45 11:16:37 AM IDs returned by detection: 2
I E46 11:16:37 AM AMD:0x89/0x8857, Intel:0x89/0x8857
I E47 11:16:37 AM AMD:0x89/0x8856, Intel:0x89/0x8856
I E48 11:16:37 AM Detected flash chips: 2
I E49 11:16:37 AM 0x89/0x8857: Intel 28F128W30B, 128 Mbit (16 MB (16777216 Bytes) in 263 sectors)
I E50 11:16:37 AM 0x89/0x8856: Intel 28F128W30T, 128 Mbit (16 MB (16777216 Bytes) in 263 sectors)
I E51 11:16:37 AM Total flash memory: 32 MB (33554432 Bytes) in 526 sectors on 2 chips
I E52 11:16:37 AM Port info:
I E53 11:16:37 AM Logical port 0: COM1 <-> UART0 at 115200 baud (~100%)
I E54 11:16:37 AM There are no reserved regions defined
I E55 11:16:37 AM Data to be transferred: 15 MB (16769024 Bytes)
I E56 11:16:37 AM VerifyData: Detected difference (0x1504d178 != 0xd9bb5b43)
I E57 11:16:38 AM VerifyData: Detected difference (0x143baa30 != 0x30fb25ce)
I E58 11:16:39 AM VerifyData: Detected difference (0xb6715f35 != 0xfe80f943)
I E59 11:16:47 AM VerifyData: Detected difference (0x5b2b17b6 != 0xa2d19e12)
I E60 11:16:55 AM VerifyData: Detected difference (0x3dba95ed != 0x58f7c4c7)
I E61 11:17:02 AM VerifyData: Detected difference (0x4fa2bc85 != 0xa8bbd476)
I E62 11:17:10 AM VerifyData: Detected difference (0xee7a9832 != 0xf6100a52)
I E63 11:17:18 AM VerifyData: Detected difference (0xba3df743 != 0x23efb21d)
I E64 11:17:25 AM VerifyData: Detected difference (0x1e9988c1 != 0x510ab8e0)
I E65 11:17:33 AM VerifyData: Detected difference (0x1353a726 != 0x9c3214d5)
I E66 11:17:41 AM VerifyData: Detected difference (0x71064bd2 != 0x710438d6)
I E67 11:17:48 AM VerifyData: Detected difference (0xca861019 != 0x3a3e41a5)
I E68 11:17:56 AM VerifyData: Detected difference (0x784218d4 != 0x5e33ad79)
I E69 11:18:04 AM VerifyData: Detected difference (0x018e99f4 != 0x25f378a6)
I E70 11:18:11 AM VerifyData: Detected difference (0x4b2dfd10 != 0xdebd3794)
I E71 11:18:19 AM VerifyData: Detected difference (0xd95f3064 != 0xe12bef46)
I E72 11:18:27 AM VerifyData: Detected difference (0x4a8f95a2 != 0xc9bd70c9)
I E73 11:18:35 AM VerifyData: Detected difference (0x44486dc2 != 0xd9e30cea)
I E74 11:18:42 AM VerifyData: Detected difference (0xa79c696e != 0x6fd40b58)
I E75 11:18:50 AM VerifyData: Detected difference (0x26eac4b2 != 0x043a4aab)
I E76 11:18:58 AM VerifyData: Detected difference (0xbb8c5fe6 != 0xd9740d45)
I E77 11:19:05 AM VerifyData: Detected difference (0x1fe23366 != 0xc629715d)
I E78 11:19:13 AM VerifyData: Detected difference (0xfa3dd894 != 0xfe95b7bf)
I E79 11:19:21 AM VerifyData: Detected difference (0xdd140dc8 != 0xa0ecf4bb)
I E80 11:19:28 AM VerifyData: Detected difference (0xd6395588 != 0x290211fb)
I E81 11:19:36 AM VerifyData: Detected difference (0x4fcb62e8 != 0xabbeb47a)
I E82 11:19:44 AM VerifyData: Detected difference (0xe2d10d48 != 0x842d7254)
I E83 11:19:51 AM VerifyData: Detected difference (0x9ca5bd8a != 0xd48f55e6)
I E84 11:19:59 AM VerifyData: Detected difference (0x5eaa2cc3 != 0x652c0090)
I E85 11:20:07 AM VerifyData: Detected difference (0x86bcd96c != 0xd0add497)
I E86 11:20:14 AM VerifyData: Detected difference (0xbd6fdfbc != 0xcede7fa1)
I E87 11:20:22 AM VerifyData: Detected difference (0x59e21573 != 0x8b60e527)
I E88 11:20:30 AM VerifyData: Detected difference (0x687c562b != 0x2946fc81)
I E89 11:20:37 AM VerifyData: Detected difference (0x93a0e28e != 0xecd2e4f9)
I E90 11:20:45 AM VerifyData: Detected difference (0xab63c0a3 != 0x0afd1c64)
I E91 11:20:53 AM VerifyData: Detected difference (0xc9784862 != 0xe9ec0f90)
I E92 11:21:00 AM VerifyData: Detected difference (0xd33f54cb != 0x5e1591c7)
I E93 11:21:47 AM Error code: ERR_PROTOCOL
E E94 11:21:47 AM Sorry, an error has occured ! (ERR_PROTOCOL)

Try flashing on a different PC.

i dont' know if this makes a difference but the phone was unlocked before i tried flashing it the first time. it was unlocked by the service provider before my contract ended. thanks for all your help so far.

ok, i got it to work on a different pc. thanks for all your help.

E715 dead after flashing

Similar Topics

New Samsung Cell Phones

Carriers Talk

Manufacturers Talk

Mobiledia Community