| Author |
Message |
maxthemenace
Posts: 9
Phone Model:
SGH-C100
Service Provider:
Bouygues |
 
Sun Jan 30, 2005 7:57 pm |
Hello, I went all over the pages without finding a solution before posting my problems,
I have a C100 using the usb cable, i manage to flash it fine, thru all the steps. But now the phone will not turn on at all. So i tried to re flash it with another firmware, and it all works fine, no error..
The only think, when i unplugg the cable, the phone will not power on !.. What can it be ? Any idea ?
The phone is useless now, so any solution is welcome, since noone can contact me by phone anymore. It's been 3 days i try everything.. in vain.
Thank you
Maxim
|
 |
Advertisement
|
|
|
|
|
nasir1123
Posts: 54 |
Mon Jan 31, 2005 4:27 am |
|
Dont forget to remove the battery for some seconds after flashing before turning your phone on!
|
|
maxthemenace
Posts: 9
Phone Model:
SGH-C100
Service Provider:
Bouygues |
Mon Jan 31, 2005 5:17 pm |
Yes I tried that. Just to make sure i even took the battery out for hours. If I try to use c100 flasher, i can see properly the time going by, and the word flashing going by... After i turn off the soft. Unplug the phone. Take the battery out for sometime, put it back, and i can press th epower button, nothing turn on. I left the phone on charge all night... what can it be ?
Thank you
Max
|
|
maxthemenace
Posts: 9
Phone Model:
SGH-C100
Service Provider:
Bouygues |
Wed Feb 02, 2005 6:45 am |
I see noone cares about helping... Thats the sad thing, easy things for some , are hard things for other. I looked in the forum and find no reply. Oh well.
Thanks, luckely the russian replies to my post.
Maxim
|
|
nasir1123
Posts: 54 |
Wed Feb 02, 2005 9:14 am |
Well the problem is I use different program and I have a different phonemodel. I am thinking about what it can be, I will post your issue on a different forum to see what people have to say about it, I will let you know asap.
Good luck in meanwhile.
I am looking up some information to see if I can find anything about your problem.
What program do you use to flash your phone with ?
|
|
nasir1123
Posts: 54 |
Wed Feb 02, 2005 11:12 am |
This is what some guy said :
two things he could try,
1)charing the phone
2)removing the battery and replace it and try to start the phone
|
|
nasir1123
Posts: 54 |
Wed Feb 02, 2005 11:14 am |
|
Can you turn your phone on if you re-flash your phone with your original firmware ?
|
|
maxthemenace
Posts: 9
Phone Model:
SGH-C100
Service Provider:
Bouygues |
Sun Feb 06, 2005 1:15 pm |
Hello? I thank you for replying, as my phone now is on the side for a good week. I did remove the battery for long in case, and i also charged it all the way.
I am unable to reflash it. When i plug the usb cable in the phone screen ligths up just a tiny, and when i unplug the screen goes dark black. But thats only when i plug the usb cable. So anyway I try to open the flash command prompt, wich works good on port 4 where my phone is plugged. But when i manage to make it start by pressing the power button, it starts moving, but stops at about 55% and the command prompt shut off itself.
Now the phone never use to light up a bit when i plugged the cable in, that is strange.
Does it help some ?
Thank you
Max
|
|
maxthemenace
Posts: 9
Phone Model:
SGH-C100
Service Provider:
Bouygues |
Sun Feb 06, 2005 1:20 pm |
One more thing, this is strange. I just realized when i plugged the usb cord in, the keypad of the phone is light up. light blue. I can see the numbers light up but nothing on the screen. as soon as i unplugg the cable the keypad light off...
strange ...
Max
|
|
maxthemenace
Posts: 9
Phone Model:
SGH-C100
Service Provider:
Bouygues |
Sun Feb 06, 2005 1:22 pm |
And i use to flash: c100repair_e2p
1000k_cs0.s37
C1.BIN
C2.BIN
REPAIR.BAT
DOWNLOAD.EXE
max
|
