| Author |
Message |
Pingwin
Posts: 6
Phone Model:
e710
Service Provider:
Era GSM |
 
Sun Jun 05, 2005 5:02 am |
Hi!
I buy damaged phone. It's after flash to E700 and I want to flas it again to e710 but when I do it in optiflash this progz show in log:
I E1 10:52:56 OptiFlash 3.7.0.1 started!
I E2 10:52:56 Preferences section [Samsung] selected!
I E3 10:53:00 ThreadGUI started
I E4 10:53:00 ThreadProtocol started
I E5 10:53:00 OS: NT family, Ver:5.1
I E6 10:53:00 Boot loader protocol type: passive
I E7 10:53:00 Memory interface type: 0
I E8 10:53:00 Setup loader: C:\Documents and Settings\Kubek\Pulpit\Telefony\samsung\e710\OptiFlash3701\OptiFlash3.7 .0.1\Models\Setup_loader1.sre
I E9 10:53:00 Setup loader base addr: 0x04000000
I E10 10:53:00 Flash loader: C:\Documents and Settings\Kubek\Pulpit\Telefony\samsung\e710\OptiFlash3701\OptiFlash3.7 .0.1\Models\fl_sceptre3_nice_std_v24.sre
I E11 10:53:00 Flash loader base addr: 0x00000000
I E12 10:53:00 Stack base addr: 0x00000000
I E13 10:53:00 Stack buffers: 2
I E14 10:53:00 0: 0x00000000 - 0x00ffffff [16 MB (16777216 Bytes)]
I E15 10:53:00 1: 0x01000000 - 0x01ffffff [16 MB (16777216 Bytes)]
I E16 10:53:00 Opened COM3 at 115200 baud
I E17 10:53:00 PC transfer speeds (COM3): 57600 115200 230400 460800 921600
I E18 10:53:00 Loading S-record file (RangeCheck=Off)
I E19 10:53:00 File: C:\Documents and Settings\Kubek\Pulpit\Telefony\samsung\e710\OptiFlash3701\OptiFlash3.7 .0.1\Models\Setup_loader1.sre
I E20 10:53:01 SRE line 178: IGNORING: S70504001000E6
I E21 10:53:01 There is 1 memory region in the S-record file:
I E22 10:53:01 1: 0x04001000 - 0x04001b03 = 2820 Bytes
I E23 10:53:01 Loading S-record file (RangeCheck=Off)
I E24 10:53:01 File: C:\Documents and Settings\Kubek\Pulpit\Telefony\samsung\e710\OptiFlash3701\OptiFlash3.7 .0.1\Models\fl_sceptre3_nice_std_v24.sre
I E25 10:53:02 SRE line 1202: IGNORING: S70500000000FA
I E26 10:53:02 There is 1 memory region in the S-record file:
I E27 10:53:02 1: 0x00000000 - 0x00004b0f = 19216 Bytes
I E28 10:53:02 Loading S-record file (RangeCheck=On)
I E29 10:53:02 File: C:\Documents and Settings\Kubek\Pulpit\Telefony\samsung\e710\E71BUWL2\E71BUWL2.sre
I E30 10:53:02 SRE line 1: IGNORING: S00600004844521B
I E31 10:53:03 SRE line 1048578: IGNORING: S705A002000058
I E32 10:53:03 There is 1 memory region in the S-record file:
I E33 10:53:03 1: 0x00000000 - 0x00fffffe = 16777215 Bytes
I E34 10:53:03 SendFile=C:\Documents and Settings\Kubek\Pulpit\Telefony\samsung\e710\OptiFlash3701\OptiFlash3.7 .0.1\Models\fl_sceptre3_nice_std_v24.sre, Mode=3
I E35 10:53:03 Hit On/Off Button
I E36 10:53:03 TalkToBootLoader (using COM3)
I E37 10:53:03 Talking to passive bootloader
I E38 10:53:05 sync'ed
I E39 10:53:05 sync'ed
I E40 10:53:05 sync'ed
I E41 10:53:05 sync'ed
I E42 10:53:05 sync'ed
I E43 10:53:05 Too many retries for PC_INFO
I E44 10:53:05 SendFile: 20 (ERR_CMD_FAILED)
I E45 10:53:05 ReLoad: 20 (ERR_CMD_FAILED)
I E46 10:53:05 Error code: ERR_CMD_FAILED
E E47 10:53:05 Sorry, an error has occured ! (ERR_CMD_FAILED)
I E48 10:53:05 ThreadProtocol finished
I E49 10:53:05 ThreadProtocol: 20
I E50 10:53:05 ThreadGUI finished
what i do wrong??
is this phone demaged?? 
|
 |
Advertisement
|
|
|
|
|
Pingwin
Posts: 6
Phone Model:
e710
Service Provider:
Era GSM |
Wed Jun 08, 2005 12:58 pm |
Can't anybody help me??
please....
|
|
HueMann
Posts: 222
Phone Model:
SE-W850i : SE-W890i : SE-W960i : |
Wed Jun 08, 2005 1:29 pm |
|
Why would you flash your E710 to E700!!?
|
|
Pingwin
Posts: 6
Phone Model:
e710
Service Provider:
Era GSM |
Wed Jun 08, 2005 3:24 pm |
|
no I... I buy this phone from guy who flash it to e700 and after that phone don't turn on and I want to flash again to e710. Maby it help...
|
|
HueMann
Posts: 222
Phone Model:
SE-W850i : SE-W890i : SE-W960i : |
Wed Jun 08, 2005 5:08 pm |
Yeah! That was a HUGE Mistake!
The e700 and 710 are completely different phones and the firmware is not at all compatible as you now know!
uhmm...try setting Optiflash to e700 and then flash the e710 firmware. If that doesn't work I don't know...what you can do to...uhh go into settings /General and turn off debug mode....
let me if this helped cause I really have no clue how to save the pphone after a WRONG firmware flash.
|
|
Pingwin
Posts: 6
Phone Model:
e710
Service Provider:
Era GSM |
Thu Jun 09, 2005 12:12 pm |
|
people any other ideas?? becouse this not work
|
|
Pingwin
Posts: 6
Phone Model:
e710
Service Provider:
Era GSM |
Mon Jun 20, 2005 6:53 am |
|
dudes.......... please.......... HHHHHHHEEEEEEEEEEEEELLLLLLLLLLLLLLLPPPPPPPPPPPPP MMMMMMMMMMEEEEEEEEEEEEE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|
Samsung
Posts: 3141
Phone Model:
Motorola RAZR2 V8 |
Mon Jun 20, 2005 3:01 pm |
|
All that Error means that a command sent to your phone failed. Remove battery for 10 seconds, make sure fully charged and reflash, you should be fine.
|
|
Pingwin
Posts: 6
Phone Model:
e710
Service Provider:
Era GSM |
Sat Jun 25, 2005 2:35 pm |
|
It's still don't help.... I dont't now what can I do now...
|
