| Author |
Message |
sabrax
Posts: 8
Phone Model:
v205
Service Provider:
t-mobile |
 
Sun Jul 10, 2005 8:54 pm |
|
i have problems whit my V205 . I bought a data cable. easyGPRS stay offline all the time even if i change the ports (com1 or com2) .i installed the samsung modem and still don`t recognize it.
|
 |
Advertisement
|
|
|
|
|
js1662
Posts: 515
Phone Model:
SGH-E316; Nokia 6020
Service Provider:
Rogers & Fido |
Mon Jul 11, 2005 7:27 pm |
|
Is it a serial cable? Did you success in installing the Samsung modem? If yes, what COM port is it using for Samsung modem?
|
|
sabrax
Posts: 8
Phone Model:
v205
Service Provider:
t-mobile |
Mon Jul 11, 2005 9:07 pm |
its a Samsung USB Data Cable whit some cd including a usb drivers for the cable . i think i install the modem well :
==============
in 'device manager' under 'modems' you don't 'samsung gprs modem'
if so, then go to 'control panel' >
'add hardware' >
click 'next' >
wait for scan to finish, select 'yes' and click 'next' >
scan to the bottom, select 'add a new hardware device' and click 'next' >
select 'instal the hardware...' and click 'next' >
select 'modems' and click 'next' >
check 'don't detect my modem....' and click 'next' >
select 'samsung' under 'manufacturer' and 'samsung gprs modem' under 'models' and click 'next' >
select 'all ports' and click 'next'
===========
then i install the easy gprs and i tried 6-7 times whit com1 & com2
still gave me : modem is not responding
|
|
js1662
Posts: 515
Phone Model:
SGH-E316; Nokia 6020
Service Provider:
Rogers & Fido |
Tue Jul 12, 2005 12:31 am |
|
Do you recall the 1st time you plug in the usb cable to your PC, did it detect any new hardware? Do you recall you installed the driver for the cable? When you go to device manager, what is under Ports (COM & LPT)?
|
|
HueMann
Posts: 222
Phone Model:
SE-W850i : SE-W890i : SE-W960i : |
Tue Jul 12, 2005 3:59 am |
|
The USB cable is seen as COM 4 ....
|
|
sabrax
Posts: 8
Phone Model:
v205
Service Provider:
t-mobile |
Tue Jul 12, 2005 7:12 pm |
thanks js1662 it was a unknown usb device whit no drivers
i unistall the drivers and pluged the cable again . then the windows just install sime drivers and recognize the cable leke a profilk usb-to-serial comm port COM3
i just change the comm ports in the settings in easy gprs
now it works ok 
|
