| Author |
Message |
ravi_no1
Posts: 4
Phone Model:
x426
Service Provider:
rogers |
 
Sun Jul 17, 2005 2:00 pm |
hello guys
well i am new in this kind of stuff so guys i need your help i have problem with my x426 phone when ever i turn on my phone i get phone locked then i have to unlock it by 3323 is there any way i can solve this problem i was reading on this site that if you have back up of your firmwares then you can overright but i don't know how i can do that. i got my friend phone and try to back up the firmwares with Optiflash but i am getting error. i don't know how i can use this thing so that i can get the back up file and write to my phone. I have x426 from rogers in toronto. ohh ya is that x427m firmware can i be written on x426 phone. if so please help me with that and please tell me if all service providers have the same firmware...
thanks guys
|
 |
Advertisement
|
|
|
|
|
veilfore89
Posts: 1396
Phone Model:
Motorola Q9h(GSM), V551(GSM), T720i(GSM), T720g(GSM)(DEAD
), T730(CDMA), Samsung x427m(GSM), Siemens A56i(GSM), E-815(CDMA)
Service Provider:
AT&T Wireless |
Sun Jul 17, 2005 2:11 pm |
Quick fix today: Open Flip, Hit Menu, Go to phone settings, Security, Phone Lock and disable it. Your problem is fixed, (If the menu is x427 like you said quick way: Menu, 9, 5, 3, Disable) Goodluck 
|
|
ravi_no1
Posts: 4
Phone Model:
x426
Service Provider:
rogers |
Sun Jul 17, 2005 2:20 pm |
sorry but it still locked
it says phone locked return for servicing
and please tell me about firmware x427m if it's going to work on x426
|
|
veilfore89
Posts: 1396
Phone Model:
Motorola Q9h(GSM), V551(GSM), T720i(GSM), T720g(GSM)(DEAD
), T730(CDMA), Samsung x427m(GSM), Siemens A56i(GSM), E-815(CDMA)
Service Provider:
AT&T Wireless |
Sun Jul 17, 2005 2:25 pm |
|
For the firmware, Yes it will work, its a bit tricky according to a friend of mine but it will work none-the-less, search the board for a mod named xxxSamsungxxx and leave an email with him, he upgraded his x426 with x427m software and should be able to help you out. Goodluck, and sorry the lock didn't go as planned.
|
|
Samsung
Posts: 3141
Phone Model:
Motorola RAZR2 V8 |
Sun Jul 17, 2005 9:09 pm |
ravi_no1,
You got mail!
haha finally got to say it Veilfore.
|
|
veilfore89
Posts: 1396
Phone Model:
Motorola Q9h(GSM), V551(GSM), T720i(GSM), T720g(GSM)(DEAD
), T730(CDMA), Samsung x427m(GSM), Siemens A56i(GSM), E-815(CDMA)
Service Provider:
AT&T Wireless |
Sun Jul 17, 2005 9:38 pm |
|
Haha, thanks for picking up on that.
|
|
ravi_no1
Posts: 4
Phone Model:
x426
Service Provider:
rogers |
Sun Jul 17, 2005 10:01 pm |
yes i got your mail...
thank you very much
it really solve my problem. thanks
|
|
Samsung
Posts: 3141
Phone Model:
Motorola RAZR2 V8 |
Sun Jul 17, 2005 10:03 pm |
No problem dude, you need further assistance feel free to drop me a line 
|
|
SLuR
Posts: 1
Phone Model:
Samsung SGH-x426/7M
Service Provider:
Rogers |
Mon Jul 18, 2005 6:00 pm |
Hm. I grabbed OptiFlash 4.14T to flash the x427 firmware onto my x426. However, it is only reading data when I am powering the phone _off_. I've selected "Customer T:X40x" in Settings, turned Debug Mode on. It does read, but when I am powering the phone on, nothing gets read. When I turn off the phone, it starts to read it and stops when the phone is off. Perhaps I'm doing something wrong.
Thank in advance for your help.
Edit : Crap. It's cause I had the charger plugged into the side of the cable too. Does it usually take about ~28m to read the firmware/ROM off the phone? And, just to make sure I don't totally bomb out - I'll backup/read the firmware, load the x427M 1.2 firmware, verify it and then Flash it right? Thanks!
|
|
teba_79
Posts: 1
Phone Model:
Samsung x426
Service Provider:
Movistar |
Mon Nov 14, 2005 11:33 am |
Hi!
I got x426 and after trying the *#0111*IMEI# method the celular says phone locked return for servicing.
I´m from South America and the service provider is Movistar.
The locked firmware is X426VEDC2
Please help me.
|
