This is my first post so if I do something wrong let me know. I bought a v600 unlocked with the following flash/flex
SE6446AXXF10F8 Triplet_G_0B.09.1DR_A DSP SW Version 62E2E000. Now I received another V600 and want to have the same versions on it and I am new to flash flexing. I tried to search the forums but I getting more and more confused. Can someone guide me in the right direction what I have to do. Thanks a lot.
Advertisement
Samsung Posts: 3141
Phone Model: Motorola RAZR2 V8
Tue Oct 18, 2005 12:18 am
TheTec wrote:
This is my first post so if I do something wrong let me know. I bought a v600 unlocked with the following flash/flex
SE6446AXXF10F8 Triplet_G_0B.09.1DR_A DSP SW Version 62E2E000. Now I received another V600 and want to have the same versions on it and I am new to flash flexing. I tried to search the forums but I getting more and more confused. Can someone guide me in the right direction what I have to do. Thanks a lot.
Download Triplet_G_0B.09.1DR and backup the flex that you want to use on the new phone using motokit. Then follow this guide to apply the files: http://www.motoaide.com:8081/faq.htm#flash Also the flash that you want to apply is fairly old will only work on the new phone if the bootloader on the new phone is not newer.
TheTec Posts: 7
Phone Model: V600
Service Provider: Tmobile
Thu Oct 20, 2005 12:49 am
I tried to to this but when I push start in multiflashflex it say Multi.... has encountered a problem an needs to shut down. Then na error message appear with cannot read memory or so . Any Ideas what am I doing wrong. Thanks
How would I use these programs any guide out there. Thanks
TheTec Posts: 7
Phone Model: V600
Service Provider: Tmobile
Fri Oct 21, 2005 11:47 am
I installed smartmoto but have no idea how to use it to install the triplets file for my moto v600
M Diddy Posts: 16
Phone Model: V600 - Hacked, Flashed, and Flexed..... ;)
Service Provider: Cingular
Sat Oct 22, 2005 1:55 pm
TheTec wrote:
I tried to to this but when I push start in multiflashflex it say Multi.... has encountered a problem an needs to shut down. Then na error message appear with cannot read memory or so . Any Ideas what am I doing wrong. Thanks
Did you install the drivers for P2Kman in the same folder you installed PST Tools??? I ran into this same problem and it only went away after in installed P2Kman in a subfolder of PST....
TheTec Posts: 7
Phone Model: V600
Service Provider: Tmobile
Sat Oct 22, 2005 8:18 pm
I did excactly as you said M Diddy and it went perfect. I appreciate your help. Thanks
M Diddy Posts: 16
Phone Model: V600 - Hacked, Flashed, and Flexed..... ;)
Service Provider: Cingular
Sat Oct 22, 2005 8:45 pm
TheTec wrote:
I did excactly as you said M Diddy and it went perfect. I appreciate your help. Thanks
View more 
