| Page 11 of 13 |
 |
| Prev 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 Next |
|
|
|
| Author |
Message |
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
 
Sat Oct 04, 2003 12:46 pm |
|
leave it
|
 |
Advertisement
|
|
|
|
|
samzh
Posts: 92
Phone Model:
SGH-V200 SGH-E700; Nokia 7610 |
Sat Oct 04, 2003 9:03 pm |
Wow finally got it done... thanks a zillion guys... special thanks to Don for being patient to me....   
|
|
sandeeps79
Posts: 31
Phone Model:
Samsung SGH V200
Service Provider:
Hutch |
Mon Oct 06, 2003 4:55 am |
After flashing to F3, sometimes I observed this bug. I chose "Take and Send" option and after that saved the photo, when I go back to the main menu there's some refresh problem. The previously taken photo gets mixed up with the current background. This doesnot occur always. It occured thrice to me. However once I restarted my phone and it worked, the other time I just closed the flap and opened after sometime, the problem was gone
Has anyone else observed this ?
|
|
samzh
Posts: 92
Phone Model:
SGH-V200 SGH-E700; Nokia 7610 |
Mon Oct 06, 2003 11:51 am |
I've got G1.... the colors are a bit darker with the same brightness level... no strange... so far.... 
|
|
cupidsux
Posts: 2
Phone Model:
S200
Service Provider:
Starhub |
Tue Oct 07, 2003 9:35 am |
i'm sorri , i was just wondering if anybody got firmware for S200 ...
cause it seems that most of the people are using V200...
sorri for the trouble
|
|
samzh
Posts: 92
Phone Model:
SGH-V200 SGH-E700; Nokia 7610 |
Tue Oct 07, 2003 10:24 am |
There you go ... http://81.112.66.158/ubb-php/ultimatebb.php?ubb=get_topic;f=42;t=00070 4
cupidsux you should've posted your question in a new topic, don't be so shy...
|
|
ilia
Posts: 4
Phone Model:
Samsung V200
Service Provider:
M-tel |
Tue Oct 07, 2003 8:19 pm |
Hey...I'm all NEW at this thing...so can you guys be patient and help me out!
I wanna flash my phone it's V200...don't know what my Verson is: the 1-st is:V20XXWA2 and the secons that shows up is:V20XEWE2...!!! 
The one I got now supports BULGARIAN language...will i loose the BG language if i flash the phone with a new sw? 
and which is the BEST for the V200...and from where can i download it any link...? 
I got the Optiflash3.6 already...BUT still don't know how to use it! 
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Tue Oct 07, 2003 8:41 pm |
| MrQ wrote: | HOW-TO: Upgrade your V200 firmware
1. Download the firmware at ANVI
2. BACKING UP YOUR V20x FIRMWARE (Make sure your phone is off).
A. Unzipped these files to a folder. Open the optiflash.exe file and go to Options=>Settings=>Read. Clear all the information from the Read Range field and add the following:
0x00000000 - 0x00001fff
0x00004000 - 0x00ffffff
B. You can save the file to whatever name you want in the Save File field. The default name is backupsave.sre. Click OK
C. Go the Com Port tab and for the first Comp Port select the correct port that your datacable is connected to. For the second COM Port select none.
D: Go to the Generic tab and select Samsung SGH-V200 in the Specify Hardware Platform field and press OK and it should bring you back to the Optiflash - [Default] box.
E: Connect your phone to the datacable and click on the Read button. Then press the power button on your phone. *Note that your phone will not be on but the program should start backing up your rom.
F. After this is done you should get a message that says "All is well / Complete!!!" in the log.
G. Next detach your phone from the datacable and take out your battery for about ten seconds and then put your battery back on.
H. Next go to File open and select the file that you just saved (save.sre or whatever you called it) and press the Verify button. If it verifies 100% it will say "All is well / Complete!!!". If you cannot pass this step, I highly recommend that you do NOT continue with the firmware upgrade.
I. If you were successful with step H, detach your phone from the datacable again and take out the battery for about ten seconds and put the battery on after that. Now you are ready to flash your firmware.
3. FLASH (firmware upgrade)
A. Go back to the Optiflash window. Go to the Options=>Settings and select the Flash and Verify tab.
B. In the File to Load or Verify field, select the V20......s3 ROM (it should be in the v20x folder.
C. In the Reserve Memory regions, make sure everything there is blank. Click OK.
D. Attach your phone again to the datacable and press the Flash button. Then press the power button on your phone. (Note that your phone will not power on but the program should start running). This process took about 15-20 minutes on my phone. When it is done it should say "All is well" in the log.
E. Detach your phone from the datacable and take out the batter for about ten seconds. Then put the battery back on and power up your phone.
F. When your phone is back on, punch in these codes: (Note that after each code is entered, your phone will go blank for about 1-2 seconds then it will come back on again.)
(Optional)
*2767*STACKRESET# <====*2767*7822573738#
*2767*MEDIA# <====*2767*63342#
*2767*FULL# <====*2767*3855#
*2767*CUST# <====*2767*2878#
*2767*WAP# <====*2767*927#
YOU are done flashing your ROM.
Works like a charm! |
|
|
PaRaDa
Posts: 9
Phone Model:
V205--->V200
Service Provider:
T-Mobile |
Tue Oct 07, 2003 11:16 pm |
|
Don, is it worth to upgrade F3 to the latest G1 ? Thanks!
|
|
ilia
Posts: 4
Phone Model:
Samsung V200
Service Provider:
M-tel |
Wed Oct 08, 2003 4:56 am |
BUT will i loose the BULGARIAN language? and what is the best Fw or SW for my phone? and from where to dowload it?
PLSSS be patient and help me out here guys...
|
| | |
|
|
Prev 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 Next |
|
| Page 11 of 13 |
|
Home > Cell Phone Forums > Manufacturers Talk > Samsung Talk > Samsung Firmware and Flashing > V200 firmware version and Samsung DIY |
|
|
|
