| Author |
Message |
snorkeller2
Posts: 7
Phone Model:
SGH-D600 |
 
Wed Feb 08, 2006 2:03 am |
Right-o.
Guess you know where to go to get it done with minimal risk, for a fee.
|
 |
Advertisement
|
|
|
|
|
Crazyjim
Posts: 4 |
Fri Feb 24, 2006 9:41 am |
| colinrocks wrote: | WOOHOO i found it!! Unbranded, D600E compatible firmware. 100% working, good signal, no branding, no vertical orange menu bar, no t-mobile startup screens!
According to the #*8999*TEST# menu this software was only released on November 19th 2005... its got to be the latest release out there.
The firmware is: D600EXBEK4
Now, before anyone asks, i'm NOT emailing it to anyone... its 77Mb (unzipped) and thats way too large to email. With permission, i'll host it for download though.
For anyone who wants to buy a serial or USB cable to flash their D600 or D600E, they can get this firmware AND all the hardware required from these guys:
Samsung D600 De-Brand Flash Pack
http://www.fonefunshop.co.uk/Unlocking/samsung.htm
Cheers all, and happy flashing,
Colin |
I think I have all I need to do the flash but I need a guide on how to do it and what files to use....
I have the 9v serial cable
OneNAND_Downloader_v17
D600EXBEK4 firmware
Can you help me to flash the phone?
Its a UK orange d600e
|
|
dynamique
Posts: 1
Phone Model:
D600
Service Provider:
Orange |
Fri Feb 24, 2006 3:41 pm |
**WARNING **
Before commencing the debranding process, you MUST have the phone battery fully charged. We cannot stress this enough, as the flashing process is highly demanding on the d600 battery. Failure to check will result in the flashing process stopping mid way and killing your phone. (see notice at the bottom of this email)
important things to know
------------------------
when flahing d600 make sure you select 1gone at the top
instructions
------------
USB Cable Users
---------------
process takes around 16 min.
connect Cable To PC
Goto System
Goto Hardawre
Goto Device Manager
Expand The Com Ports Area
Locate and write down the assigned com port number for your cable (normally the largest number)
Make sure your D600 Battery is fully charged as this process takes approx 20 min, and if the battery fails you WILL kill your phone.
power off the phone with no sim inserted and connect phone to cable and cable to PC.
select correct com port that you wrote down earlier.
when flahing d600 make sure you select 1gone at the top
com speed should be 921600.
select the BIN + TFS radio button.
D600 users press the BIN button and open the ".cla" file. from the d600 folder
D600 users press the TFS button and open the ".tfs" file. from the d600 folder
Click Start.
tap the power button on the phone when prompted. The phone should not turn on, but software will recognise the ignition.
Phone will connect, and the "Download" button will now be highlighted
click the download button and the flash will begin
Note: the entire flashing process takes approx 16 min.
Once flash has finnished, press stop
Phone successfully flashed
take out and replace battery and power on
---------------------------------------------------------------------- -----------------------------------
Serial Cable Users
------------------
process takes around 16 min.
Make sure your D600 Battery is fully charged
Connect 9v Battery to Cable, must be a brand new battery as this process takes approx 90 min, and if the battery fails you WILL kill your phone.
power off the phone with no sim inserted and connect phone to cable and cable to PC.
when flahing d600 make sure you select 1gone at the top
select correct com port.
com speed should be 115200.
select the BIN + TFS radio button.
D600 users press the BIN button and open the ".cla" file. from the d600 folder
D600 users press the TFS button and open the ".tfs" file. from the d600 folder
Click Start.
tap the power button on the phone when prompted. The phone should not turn on, but software will recognise the ignition.
Phone will connect, and the "Download" button will now be highlighted
click the download button and the flash will begin
Note: the entire flashing process takes approx 90 min.
Once flash has finnished, press stop
Phone successfully flashed
take out and replace battery and power on
|
|
Crazyjim
Posts: 4 |
Sun Feb 26, 2006 1:10 pm |
Went for it and 1.5 hours or so later its all good and now I have a non orange sweet super fast phone......
Thx for all of your help.... D600EXBEK4 is the version to go with!
|
|
TheMVP
Posts: 2
Phone Model:
Samsung D600
Service Provider:
o2 |
Sat Mar 04, 2006 2:09 pm |
Still havn't found it, and even if i do now it sounds too confusin to even do 
|
|
monza
Posts: 1
Phone Model:
d600 |
Sun Mar 05, 2006 10:23 am |
i have attempted to flash my D600e with the EXBEK4 firmware which i found on the net.
i believe the flash process is a two part affair.
first you need to flash using the BIN file... which i did (D600EXDEK5.cla). This took about 30 minutes.
However when it came to the TFS part ( D600EXBEK4.tfs ) the oneNand tool shows me the error:
" fail to open <path>\d600exbek4.cgf "
and thats it .... nothing else.
anyone know if this is becuase the TFS file is corrupt or am i overlooking something else?
i really would like to get hold of another source for the file in case its an issue with the one i downloaded... but i can only find one other place to download it : which is on rapidshare.de
HOWEVER it just wont let me download from there.. with some silly error message.
help  please
|
|
xux99
Posts: 11
Phone Model:
Sony Ericsson K550i
Service Provider:
Wind |
Mon Mar 06, 2006 7:47 am |
|
Here you can download free Samsung SGH-D600 flash files.
|
|
apape10
Posts: 23
Phone Model:
Samsung e770 & e720 & e715
Service Provider:
T-Mobile |
Fri Mar 10, 2006 3:57 am |
howdy,
i just ordered my d600 quad band... are any of these new firmwares quad band firmwares for this phone... or are they all triband?
thanks
oh can anyone help me find e770 firmware to make it a quad band phone? i will pay for any help!
|
|
bigyun2000
Posts: 3
Phone Model:
Nokia N70 - Samsung & Motorola
Service Provider:
O2 & Vodafone |
Fri Mar 10, 2006 6:21 am |
Hi sajjo.
would be interested in the unbranded firmware. Cannt seem to PM you here so will do it this method.
CHEERS
|
|
HueMann
Posts: 222
Phone Model:
SE-W850i : SE-W890i : HTC Touch PRO: |
Wed Mar 22, 2006 3:43 pm |
| colinrocks wrote: | WOOHOO i found it!! Unbranded, D600E compatible firmware. 100% working, good signal, no branding, no vertical orange menu bar, no t-mobile startup screens!
According to the #*8999*TEST# menu this software was only released on November 19th 2005... its got to be the latest release out there.
The firmware is: D600EXBEK4
Now, before anyone asks, i'm NOT emailing it to anyone... its 77Mb (unzipped) and thats way too large to email. With permission, i'll host it for download though.
For anyone who wants to buy a serial or USB cable to flash their D600 or D600E, they can get this firmware AND all the hardware required from these guys:
Samsung D600 De-Brand Flash Pack
http://www.fonefunshop.co.uk/Unlocking/samsung.htm
Cheers all, and happy flashing,
Colin |
What Software did you get in this pack? What's the name of the flash program?
|
| | |
|
|
|
 |
 |
 |
Sign up for a roundup of the day's top stories. |
|
|
View more 