| Author |
Message |
paisitarojo
Posts: 18
Phone Model:
v600
Service Provider:
Cingular |
 
Thu Jan 26, 2006 10:26 pm |
hi i hope someone could help me out with this one... yesterday i tried to flash my phone, and now its dead!!!!  please somebody help me!! i tried with the smart clip, but nuttin... any ideas???
|
 |
Advertisement
|
|
|
|
|
Samsung
Posts: 3141
Phone Model:
Motorola RAZR2 V8 |
Sat Jan 28, 2006 5:30 am |
|
try another battery?
|
|
amr_ibrahim
Posts: 1 |
Sun Jan 29, 2006 3:47 pm |
how phone dead exactly explain more..
The program crashed in the middle of the process or dead after flash.
and tell me what phone version before flash
and what flash file u flash it...
|
|
paisitarojo
Posts: 18
Phone Model:
v600
Service Provider:
Cingular |
Mon Jan 30, 2006 9:44 pm |
|
it had a v3 one... i cant remember exactly wich one... after it flashed, it just didnt turn on again!!! please help me
|
|
Old_Fool
Posts: 2123
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Tue Jan 31, 2006 9:15 am |
| paisitarojo wrote: | | it had a v3 one... i cant remember exactly wich one... after it flashed, it just didnt turn on again!!! please help me |
So you have flash the v3 flash (firmware) into V600 ?.
Hook your Smart clip to PC, your fone to SC open up smart moto it will then detect your fone and your clip.
Click on repair, choose v600 and do PDS repair then flash it with monster pack triplet 72R after that. IF not work you have to do test point because that bootloader of v3 is not easy to get rid of
|
|
sixxkilurmoto
Posts: 6 |
Sat Jun 10, 2006 6:41 pm |
I have a V551J flashed it with MultiFlashFlex flash file
TRIPLETS_G_0B.09.72R_LP0032_JPJAVA_G_0B_TRIPLET_04_05R_SE6424AXXT11D4_ 1FF.rar
came across several successful articles stating V551 to V600 no probs
the flash was successful as far as the software side of things
now phone will not come on, battery will not charge, nothing no boot screen, * # power a no go. hooked USB cable up windows can't see the phone like it was doing so etc. i beleive i have a dead phone, may be able to fix with some hardware the connects to PC and Phone to program
budget is low so that isn't an option. i saved up for my Phone, now it's dead. i am back to the bottom can anyone help me please!
|
|
Old_Fool
Posts: 2123
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Sat Jun 10, 2006 6:47 pm |
Where exactly did you read those article that said flash V551 to V600 is ok?? there might be V505 because is the same base triplet but not the V551.
Email me if you need to get it fix
|
|
sixxkilurmoto
Posts: 6 |
Sat Jun 10, 2006 7:02 pm |
i found it on hack a day, yea they wasn't specific on the V models just Vxxx
3. Posted Jan 19, 2005, 12:13 PM ET by dt
For those of you with a Vxxx fone < 600, you can use the data cable to flash your phone to a 600. they have the same hardware.
I just did this today from a v525 (same as v500) to v600.
this just tells you how to flash your V600 successfully http://www.mob453.com/phones/motorola_v600/
|
|
sixxkilurmoto
Posts: 6 |
Sat Jun 10, 2006 7:36 pm |
ok all the above the same except for i was able to force the phone in boot loader mode by shorting pins 4+5 that worked great. looking at my Boot loader now info displayed.
Boot Loader
07.0E
SW_Version:
R472_G_08.18.16R_0A
researching the next logicle step..............
Any suggestions would be greatly aprreciated.
|
|
Darknova
Posts: 200
Phone Model:
Motorola V635: R474_G_08.48.90
R + GCPU635TLEUKOTI
C
Service Provider:
O2 |
Sat Jun 10, 2006 7:47 pm |
|
Er, dude, you do understand that the v551 isn't a Vxxx series right? That's why you had problems. It uses a different firmware. The Vxxx series uses TRIPLETS firmware, the v551 uses R472.
|
