hi can someone please help me i have just bought a samsung e800 facia but dont have a clue on how to change it over if someone could please help me or give me some information i would be very greatfull here is my email address if someone could kindly help thankyou
That's not much help actually, the D500 has a 2 piece body whereas the E800 is solid - there is no back to pull off.
Is there an E800 video?
Kiefels Posts: 43
Phone Model: Nokia N80 Samsung D900/ D500/ E710/ E600/ T100
Service Provider: Orange
Tue Mar 14, 2006 1:52 pm
Er!!
I think you will find that the E800 goes together the same way as the D500.
If it was 1 piece how would people be able to sell replacement fascias?
I am not going to argue over this FACT as I have taken E800's to bits myself.
All I am trying to do is point people in the right direction. If you are not happy with a video what else can we possibly do?
JSavage Posts: 3
Phone Model: Samsung SGH-E800
Service Provider: O2
Tue Mar 14, 2006 2:10 pm
Sorry, I wasn't accusing you!
My E800 doesn't have a pull off back after taking the 4 screws out, it's solid.
It's driving me nuts too!
Kiefels Posts: 43
Phone Model: Nokia N80 Samsung D900/ D500/ E710/ E600/ T100
Service Provider: Orange
Tue Mar 14, 2006 4:58 pm
It does come apart. TRUST ME!
In the bottom of the phone (Looking from the rear)
You have two inset clips (where the battery clips in)
Using these you can carefully manoevre the inside part of the housing, in. So as to release the plastic moulded clips that are holding the two halves together.
You should then be able to lift the inside part of the housing away from the outside (Keypad)housing section.
You are gonna have to believe me, they do come apart. It doesn't split like any other Samsung (Two Halves) as I say, they have an inside part of the housing so as to appear NOT to have any seams.