| Author |
Message |
manu_grim
Posts: 1
Phone Model:
D600
Service Provider:
Orange |
 
Mon Mar 06, 2006 2:50 pm |
hello
I have seen you know a lot about Samsung D600
caould you please tell me how to upload java games from my pc using a USB cable?
I have been searching for more than 2 mounths and all I could find was bulshit.
Thanx in advance
|
 |
Advertisement
|
|
|
|
|
nata
Posts: 5
Phone Model:
D500
Service Provider:
optus |
Mon Mar 20, 2006 11:13 pm |
| bunnykiller wrote: | Hi Kiefels,
Thanks for the quick response, I have checked what you said, it says I have com 1 and com 2, it says both devices are working properly but it says that when nothing is plugged into the PC anyway, so im not sure if it is or isnt working still. I have only one port on the back of the PC that the cable fits into so i cant go wrong with that but no software i use is detecting when i power the phone on. I have got in touch with the seller of the cable and he said it was working fine when it left coz he tested it on his phone.
Anymore help will be brilliant as im losing hair drastically and have this lovely phone that i cant use yet.
Thankyou very much |
hi there i have a d500 it is blocked i have a usb cable what else do i need to get rid of the network block somei plz help me
|
|
Crazyjim
Posts: 4 |
Thu Jul 27, 2006 6:34 am |
|
Did you ever solve this problem..... I have the same issue and I have already used the cable to flash my d600e but i can't get it to work on my girlfriends..... it's driving me mad as there must be some order or something that gets it going as when i press the power button nothing happens!..... I have read loads of guides and they all say the same thing and that's what I copy.... driving me mad!!!!!!!!!
|
|
Kiefels
Posts: 43
Phone Model:
Nokia N80 Samsung D900/ D500/ E710/ E600/ T100
Service Provider:
Orange |
Thu Jul 27, 2006 11:44 am |
Some 600's are temperamental when it comes to getting into TAT mode.
If you are using a D500 serial, flashing cable with a 9v battery connection and it works with the 500 it will work with the 600.
I have worked on 600's and some do indeed seem to be fussy. I had to even purchase another cable because one wouldn't work with mine then all seemed fine. But the next 600 I got worked fine with my old cable.
Just play around trying different things.
Restart PC, don't plug phone in until you need to, remove phones battery then replace after a while, try cleaning out the cable port on the phone with a thin piece of card or the corner of a folded piece of paper.
I am no different to anyone else on here. I have a d500 cable and I can work on 600's with it I am no expert and do not do this for a living. I learned by trying things out and I made mistakes just like others have.
|
|
Crazyjim
Posts: 4 |
Tue Aug 01, 2006 4:28 am |
I have tried so many combinations and the thing still won't work..... it's driving me nuts!
Like I say, I know the cable works as I used it on my phones and this is simply another D600E from Orange.... why does it have to be so complicated!
Are USB cables any better as I might buy one of those instead... I have a great firmware and want to get rid of the orange junk for my girlfriend. 
|
|
Kiefels
Posts: 43
Phone Model:
Nokia N80 Samsung D900/ D500/ E710/ E600/ T100
Service Provider:
Orange |
Tue Aug 01, 2006 1:08 pm |
Usb cables are usually either just for flashing or just for unlocking.
Serial cables do both.
If you are in the UK I could do the flashing for you.
I wouldn't charge as that would negate you trying to DIY.
email me at kiefels at hotmail dot com
|
|
BoroBoi20
Posts: 1 |
Tue Aug 01, 2006 3:10 pm |
I have a E350 with a D600E cable... I downloaded the Usb drivers 2.0 and samsung pc studio 2.0 for the E350 from the samsung website but my phone wont seem to connect with the studio so it wont let me do anything... i tried downloading the version 3.0 and my phone connects to this but wont let me do anything? Can anyone help
email me on up4you18@hotmail.com
any help will be much appreciated
|
|
kaneo
Posts: 1 |
Thu Jun 05, 2008 3:18 pm |
|
Please Please HELP I have recently bought data cable for E600 and have managed to install software but reach a point where this message come up on my PC screen "COM3: Samsung GPRS Modem not found" where do I go from here as I dont know much about PC's and the cable did not come with written information. can anyone help me? Please
|
