Can you give me the URL where I can find a guide to use WinIMEI, I try to read the IMEI settings but the program asks me for user/password information.
I tried with some flashes I got an error in the line Success : Read Phone's Old MSLAddress! - Thread1... it shows something like (0000000)/0.. only with D908ZCFH2 I can pass this check.
I did some work for my ROKR, I used xvi32HEXED. Just tell me what to do and I'll try it. Do you think I can modify the .cla file before downloading it to the phone? In wich address can I find the IMEI and BT MAC address? Is there any way to know my original BT MAC address?
The BT MAC starts at Offset: 207218 (Hex)
You'll see the following hex valeus: 88D0 5500 D500 1700 which is 00:17:D5:55:D0:88 mac wise.
The IMEI starts at offset: 206CA8
Change the nines to your imei.
After your done, save the file and flash the NOR from offset 0x1C00000 (5 x zero)
PS: If your using Bluesoleil you can look at the device history for your original mac adress.
Thanks Don,
I think I did what you asked me to but the results was not the expected , look:
- I changed the 9s to my IMEI, I flashed the file, now I have IMEI but not the mine, I think I have the yours.
- I flashed the file starting @ 0x11C00000, Is the more alike the address you said, please tell me If I'm wrong, I could not download it beginign @ 0x1C00000, the Downloader shows me an error
- After flashing the modified file, my BT MAC Address changed too, but no to 00:17:D5:55:D0:88, I have the original D900XAFG6 BT MAC Address.
- I looked in the original D900XAFG6 .cla file and I foud the IMEI I have now.
- I changed the IMEI in the original D900XAFG6 .cla file and the 9s in the last file you posted and I can not change the IMEI
- Now I flash the D900XAFG6_Erom_0x1C00000.cla over what ever flash and I get the the same IMEI (I think the yours) and the same BT MAC address
- I did some comparision between D900XAFG6_Erom_0x1C00000.cla and the original D900XAFG6.cla file you posted and it seems like D900XAFG6_Erom_0x1C00000.cla is not included in the original D900XAFG6.cla file or may be the corresponding addresses range offsets are totally different. Did you patch D900XAFG6.cla before posting It?
- Where I can find the Address Map / Firmware architecture for a .cla file? I think there is a lack of documentation about it. I really want to be able of modding the firmware but I can not find any information / tool
I do not know If I'm doing something wrong, but I't makes me think that it is not a as simple as editing the .cla file
Please help. Best regards.
Last edited by wricaurte on Tue Oct 03, 2006 10:12 am, edited 2 times in total
ucf4004 Posts: 9
Phone Model: Samsung V200
Service Provider: T-mobile
Mon Oct 02, 2006 2:49 pm
could anyone help me resurrect my E310 & V200,
I flashed them but they don't wake up (turn on)
~ Don ~ Posts: 2007
Phone Model: Samsung D900 FW: D900XAFI1
Service Provider: NL KPN
Wed Oct 04, 2006 5:17 am
@wricaurte
Does your imei end with 919? And your right about the 0x11C00000 Do you know how to "fix" programs?
@ucf4004
Did you get the message "All is Well" after flashing?
ucf4004 Posts: 9
Phone Model: Samsung V200
Service Provider: T-mobile
Wed Oct 04, 2006 6:55 am
~ Don ~ wrote:
@ucf4004
Did you get the message "All is Well" after flashing?
No , I didn't got any message, just phone turned off and didn't turn on
.
, look:
View more 
