| Author |
Message |
Old_Fool
Posts: 2125
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
 
Thu Jul 20, 2006 7:56 am |
Battery is low so you can not do any flashing to it.
Code corrup, meaning that during flashing process form code group 1 to 18 , flash failed.
So get a fully charge battery then find RSD 2.4 and flash your fone again with the correct MP for your fone model
|
 |
Advertisement
|
|
|
|
|
muj
Posts: 11 |
Fri Jul 21, 2006 4:14 am |
Has any of you made a successful reflash? Now I have got everything except for rsd to get started. Got a fuly charged battery, p2k 2.9 drivers installed and the suitable MP for V3i with itunes.
Thanks to Old_Fool for guidance
|
|
muj
Posts: 11 |
Fri Jul 21, 2006 10:57 am |
Finally got rsd 2.7 and tried but it came up with flash failed error as soon as I pressed the start button.
my device details are below as shown by rsd.
ESN: N / A
Technology: N / A
Software Version: R47A_G_08.D8.35R
Flex Version: GSPSLQAT676VB06B
Bootloader Version: v0x000A30
DRM Version: N / A
Phone Type: Production (EAA00B500D10090B4A1CD7DEC554)
I used MP file R47A_G_08.D8.35R_PDS005_LP0034_DRM0101_VSTUK_ENGLISH206_JPJAVA_G_08_V3 iiT_07_00_06R_GSPSLQAT677DY061_1FF
Any help on what went wrong pls?
|
|
muj
Posts: 11 |
Sat Jul 22, 2006 12:23 am |
FlashErrorLog shows as beow
Error sending jump command device API error:0xe0030006 Address:0x3fc8010 Command:RQVN
File:Y:\test_dev_usb\flash\code\flashdll\PST-FP_FlashThread.cpp
Device ID:0
I'm using RSD Lite 4.7
Any help please!
|
|
muj
Posts: 11 |
Sat Jul 22, 2006 12:25 am |
|
Correction RSD Lite 2.7
|
|
Old_Fool
Posts: 2125
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Sat Jul 22, 2006 12:33 pm |
Do not us laptop to flash
Do not use front USB port to flash use the back .
If possible try to fing version 2.5 as i have read ther were alot of ppl have problem with 2.7 but not 2.5.
Good luck
|
|
muj
Posts: 11 |
Sun Jul 23, 2006 12:09 am |
With 2.5 and back usb port i was able to do a successful reflash but after that also it goes to the bootloader screen as shown below
Boot Loader
0A.30.
SW Version:
RA7A_G_08.D8.35R
PHONE CODE SIG
ERROR:
OK to Program
Connect USB
Data Cable
I'm beginning to loose hope  Any further suggestions?
TIA
|
|
Old_Fool
Posts: 2125
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Sun Jul 23, 2006 4:45 pm |
I wonder if you have any connection loose due to the hard hit.
I don't have any idea or solution at all unless i have the fone to inspect
|
|
muj
Posts: 11 |
Mon Jul 24, 2006 1:00 am |
There is no physical damage. Here is what RSD SWDL.txt shows.
07/23/06 11:44:51 New Log Started For Software Download.
07/23/06 11:44:51 The FlashLog reg key is turned off.
07/23/06 11:44:51 The FlashLog is turned off.
07/23/06 11:44:54 ERROR: PSTTestCmdInit failed: Error Code 40 on device ID 0
07/23/06 11:44:54 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:44:54 Unable to read SEEM element: ESN
07/23/06 11:44:54 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:44:54 Unable to read SEEM element: ESN
07/23/06 11:45:16 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:45:16 Unable to read SEEM element: Technology
07/23/06 11:45:16 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:45:16 Unable to read SEEM element: Technology
07/23/06 11:45:16 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:45:16 Unable to read SEEM element: ESN
07/23/06 11:45:16 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:45:16 Unable to read SEEM element: Technology
07/23/06 11:45:16 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:45:16 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:45:16 Unable to read SEEM element: Version Of Flex Files
07/23/06 11:45:16 ERROR: PSTGetInterfaceHandle failed: Error Code 71 on device ID 0
07/23/06 11:45:18 Multi upgrade started for 1 phones
07/23/06 11:53:01 FlashLog file is turned off.
07/23/06 11:53:01 Multi upgrade finished.
Does this give any clue?
|
|
Old_Fool
Posts: 2125
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Mon Jul 24, 2006 7:38 am |
For some reason it got a hard time to get the interface!!!
Sorry i out of idea
|
