Charged the phone at the mains all day an night, and the phone still says battery low in bootloader mode
Any Ideas
Advertisement
ugg Posts: 8
Tue Sep 19, 2006 9:26 pm
i gave up and sent the phone back where i bought it from, wish i could help, but i just wasn't in the mood to play around with it. hope someone here can give you advice.
bklynsweetest Posts: 10
Thu Jan 18, 2007 11:41 pm
its says this when i load it in bootloader
0a.30
sw version
You have to take it to someone who can Unlock using a smart clip the 0a.30 is the newest firmware and can't be unlocked by normal methods using a computer. Look for a post by old fool.
mikekay10 Posts: 2958
Service Provider: Vodafone
Fri Jan 19, 2007 12:43 pm
If its bootloader 0A.30 its not a V3 - its probably a v3r
ajonhb Posts: 1
Mon Mar 05, 2007 4:38 am
hey recenty i removed my battery and it has been giving me an error:
ive read through the forums but i haven't found any errors exactly like mine and i didn't know if it made a difference going about the same process etc
mikekay10 Posts: 2958
Service Provider: Vodafone
Mon Mar 05, 2007 8:22 am
Its a myfavs V3r. Looks like the code has corrupted - usually an error with memory chip.
You can try flashing a monsterpack, personally I would look at warranty if you have any
wizkid257 Posts: 7
Tue Jul 03, 2007 2:03 pm
restart it
kean Posts: 1
Sat Jul 14, 2007 12:25 pm
I have the same problem with my V3i.
Error file below when I try to flash using RSD Lite 2.7:
08:47:28, June 25, 2007
Line: 347
ERROR: Flash failure: Phone[0000]: Error sending JUMP command Device API Error: 0xE0030006 Address: 0x3FC8010 Command: RQVN (Error Code: e0030006),
Detailed Error Details: Direction of the Error=1000, Command Value=1200000, Code Group Number=No Codegroup
File: Y:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
AhMutt331 Posts: 7
Fri Aug 10, 2007 12:59 am
Well I am trying to fix my phone.
I deleted some pretty important files.(The original skins Silver and Moto)
Well I was told that when I deleted those it messed up my phone. Which is why I thought maybe if i did a Monster Pack.
I used Flash&Backup3 trial.
Well I don't know if I did anything right. I now have this thing on my phone.
(which this is how i found this post due to searching the problem)
Boot Loader 08.23
SW Version: R374_G_0E.42.0DR
OK to Program USB
Transfer Mode
Well I don't know what to do. It only shows this when it is being charged through the wall charger. It wont show when I unplug it. It is a blank screen and the buttons flicker green and then back out, in intervals. Well when I plug it into my pc, it acts as though it isn't plugged in at all. I just got this Razr. And I just wanted to have some fun. Well playtime is over and I messed up. I didn't back anything up. P2K wont read it at all. Flash&Backup doesn't know it is being plugged in. Please anyone can help me.
View more 
