thanks.
maybe i can take it to a store and play dumb
and see if they can just reset it.
like idk the cingular place.
Advertisement
waterlemming Posts: 1
Sun Oct 21, 2007 1:25 am
Hello,
I've experienced the same problem two days ago on my Cingular (unlocked) RAZR V3. Phone was turned off and when I turned it on, its stuck on the bootloader screen with the following message:
BOOT LOADER
08.26
SW Version:
R374_G_0E.41.C
3R_B
Battery OK
OK to Program
Connect USB
Data Cable
PHONE CODE SIG
35:02:
I've had the phone for almost 2 years now and it has never been modified and the unlock code was provided by Cingular. I've tried changing batteries, SIM Cards, removing everything and letting it sit overnight, etc. I don't really care if it ever works again, but is there any way that I can retreive the contact info? I would greatly appreciate any advice. Thanks.
mikekay10 Posts: 2958
Service Provider: Vodafone
Mon Oct 22, 2007 3:56 pm
I'm afraid its most likely a hardware issue. The only suggestion I could make is to flash a monsterpack but this most likely won't work and will erase anything on the phone anyway.
Sorry
gabrivitale Posts: 2
Tue Oct 30, 2007 3:03 pm
but what does it mean "to flash a mobile"? and how can i do that?
I sent a data from my PC to the mobile yesterday and now the phone is on boot loader 0.6.8.2 what can I do?
It's a motorola v3x
gabrivitale Posts: 2
Tue Oct 30, 2007 5:24 pm
Old_Fool wrote:
NO you can not, the fone need to be reflsh and by doing so it will be wipe off of everything.
sorry, what does it mean "to flash a mobile"?
Old_Fool Posts: 2214
Phone Model: If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider: ATT
Tue Oct 30, 2007 5:52 pm
menaning that you are going to replace the software in the fone
dpiperjr Posts: 1
Fri Nov 16, 2007 9:38 pm
Hi, I have a similar problem.
Boot Loader
08.26
SW_Version:
R374_G_0E.42.1
5R
OK to Program
USB
Transfer Mode
noppizzle Posts: 4
Thu Jan 10, 2008 10:15 pm
Hi im in desperate need of some help.i tried to flash some v3 firmware to my phone and afte everything was done my screen doesnt come on and my keypad light jus stays on .even when i take out and and put in the battery it jus goes off then the keypad light goes back on when the battery is back .i need help pleaseeee
kaitou_capo Posts: 1
Mon Feb 25, 2008 9:01 pm
I have a razr v3(G 8/9/18/19) And to be honest i'm a newb at flashing flexing and unlocking if it doesn't involve a code calculator,and even then i'm not that good,Buut i wanted to know if the battery dies during flashing will the effects be dire or is there still a way to salvage this fone,please say there is i got it for my birthday 2 months ago and i tried unlocking through flashing and now i'm at a total loss
Old_Fool Posts: 2214
Phone Model: If it's locked, ican unlock it. If you brick it, I can fix it
View more 
