| Author |
Message |
Perfectphase
Posts: 1 |
 
Mon Jul 17, 2006 9:59 am |
Hi all, first post here but I have been looking through the forums for an answer but with no luck!
I have a Motorola Razr V3 that is stuck on the boot loader screen, every time you turn it on it goes to the boot loader screen. This is somewhat of a pain. It has never been flashed/flexed/whatever I I am assuming that the internal flash has been corrupted somehow.
It's still under warranty but I need to try and save some of the pictures on it and if possible the contact list, the shop said that I would lose everything if it's sent a way for repair. Is it possible to save it?
I don't really care if the phone is useable, provided I can get the data off it!
Thanks for any advice,
Stephen.
|
 |
Advertisement
|
|
|
|
|
Old_Fool
Posts: 2123
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Mon Jul 17, 2006 2:01 pm |
|
NO you can not, the fone need to be reflsh and by doing so it will be wipe off of everything.
|
|
bigwillokc
Posts: 1 |
Mon Jul 17, 2006 3:49 pm |
I have an unlocked v3i that i bought from ebay and it worked fine for 2 weeks, but now when i put the battery in it says
Boot Loader
0A.30.
SW Version:
R479_G_08.B4.85R
PHONE CODE SIG
ERROR:
OK to Program
Connect USB
Data Cable
I have not done any modifications to the phone and motorola will not help me because they said i am in the United States and the phone is an overseas model. Can anyone help me???
|
|
Old_Fool
Posts: 2123
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Mon Jul 17, 2006 6:25 pm |
|
USe RSD 2.4 or higher nabd flash it again with R749 MP. I f that still not work email me for fixing detail
|
|
muj
Posts: 11 |
Wed Jul 19, 2006 2:27 am |
I too have have an unlocked v3i that i bought from ebay and it worked fine for about 3 weeks, and stuck with the same problem. Mine shows
Boot Loader
0A.30.
SW Version:
RA7A_G_08.D8.35R
PHONE CODE SIG
ERROR:
OK to Program
Connect USB
Data Cable
Actually this incident occured after I fell of from my Mobike while the V3i was in my trousers pocket. Reading this thread it seems like it has nothing to do with the incident.
|
|
Old_Fool
Posts: 2123
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Wed Jul 19, 2006 7:36 am |
|
Same solution , try to reflash it first
|
|
muj
Posts: 11 |
Wed Jul 19, 2006 10:47 pm |
|
Now I have read enough about getting started with a reflash but getting rsd is not easy. Is there a link where I can get rsd 2.4?
|
|
Old_Fool
Posts: 2123
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Wed Jul 19, 2006 11:26 pm |
It's consider warez and agins forum rule please don't ask.
Google is your best friend
|
|
timba1210
Posts: 2 |
Thu Jul 20, 2006 2:38 am |
|
I have a similar problem, but my phone says "Battery Low Cannot Program" at the bottom. I have read on other forums that, despite the battey's actual condition, a corrupt bootloader will cause this error message. How do I fix this?
|
|
timba1210
Posts: 2 |
Thu Jul 20, 2006 2:40 am |
The full error message is as follows:
Boot Loader
0A.30.
SW Version:
RA7A_G_08.D8.8
8R
Code Corrupt
Battery Low
Cannot Program
|
| | |
|
|
|
|
