Firmwares & Flashers - Part 1 (Read First)

Use optiflash 3.3

Now i using the opiflash 3.3
in the settings for specify flash loader, i choose v200.sre.
Then in the flash&verify i choose the rom that i wanted to flash.
After i click flash the message on the log says
I E1 8:42:55 PM OptiFlash 3.3.0.8 started!
I E2 8:42:55 PM Preferences section [Default] selected!
I E3 8:43:24 PM ThreadGUI started
I E4 8:43:24 PM ThreadProtocol started
I E5 8:43:24 PM Opened COM1 at 115200 baud
I E6 8:43:25 PM PC transfer speeds (COM1): 57600 115200
I E7 8:43:25 PM Loading S-record file: <C:\My Documents\OPTIFLASH3.3\FLASHLOADERS\V200.sre>, RangeCheck=Off
I E8 8:43:25 PM There is 1 memory region in the S-record file:
I E9 8:43:25 PM 1: 0x00000000 - 0x00004a4b = 19020 Bytes
I E10 8:43:25 PM Loading S-record file: <C:\My Documents\V26UEWG1.s3>, RangeCheck=On
I E11 8:43:27 PM There is 1 memory region in the S-record file:
I E12 8:43:27 PM 1: 0x00000000 - 0x00ffffff = 16777216 Bytes
I E13 8:43:27 PM SendFile=C:\My Documents\OPTIFLASH3.3\FLASHLOADERS\V200.sre, Mode=3
I E14 8:43:27 PM Power on mobile !
I E15 8:43:27 PM TalkToBootloader (using COM1)
I E16 8:43:27 PM Talking to active bootloader

also the program says i have to switch on the phone, i did switch it on and nothing happened. Then i unplug the cable and take out the baterry for 10 secs and i plug it in again and press the power on, nothing happened.

Help me don. Thanks

When optiflash says turn on mobile push the on/off button and leave the cable connected:
I E15 8:43:27 PM TalkToBootloader (using COM1)
I E16 8:43:27 PM Talking to active bootloader
It was abouth to begin to flash and that takes abouth 20 mins after optiflash says All Is Well you can remove the cable.

Before you try to reflash your phone: Remove the batt 5 secs»Put it back»Attatch the cable»Select the firmware to flash and push the flash button.

sorry don u might be bored with me always asking help.
I did like what you said to me.
I leave it for 20 minutes the optiflash program still saying turn on mobilephone. If it in the optiflash 3.6 it will saying loading flash or so.Also the progression bar below is blank not even one bar or wathever.
Do you think the program working or not?
Because in otiflash 3.6 after i turned on the phone the progression bar is working, in optiflash 3.3 it just only working when i click the flash button and after it loading the s-record. When it reach the point to turn on the phone (i did turn on the phone a that point)
The phone from birght white turns off, but the program still say turn on the mobile, and no progression bar, until i write this reply.
So how don? thanks

So the log ended at Power on mobile ! ? if so try restarting optiflash and try it again. And also do you see 0% somewhere next to the progress bar?

yes it stopped after it said turn on the mobilephone. There aren't any progression bar and no percentage. I've tried to restart the program it still the same, even i restart my computer, but nothing happen still stop in the turn on the mobile

Do you have a pc with windows xp or do you know someone with it? If so you can use Optiflash 3.6. Or you can try running optiflash 3.6 again on ME.

One quick question: Did you backedup your firmware?

i did back it up with optiflash 3.6 but i can't flash it to original now, im trying to flash it with xp, see how is the progression. ALso how to work the thing out now don?

thanks don it works in win xp and the phone can be use again.
once again thanks for the help don!

Work what thing out?

Firmwares & Flashers - Part 1 (Read First)

Similar Topics

New Samsung Cell Phones

Carriers Talk

Manufacturers Talk

Mobiledia Community