| Page 30 of 50 |
 |
| Prev 1 ... 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40 ... 50 Next |
|
|
|
| Author |
Message |
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
 
Sat Mar 27, 2004 8:39 pm |
@yivk
With a flash dumper you can save your firmware and than you can modify the firmware with a hex editor to hex the games into the firmware.
@aztic
Strange problem i can't find my V200 to test the problem but i guess its the optiflashes fault if so many people are having that problem. Try it with Optiflash 3.5 @ http://yqused.myetang.com/software-en.htm.
@cash_evo6
E75 is E715 firmware(T-Mobile) looks much better than the E71(E710 VODA) firmware so if you want to get rid of the vodafone crap and your not a full time wapper that doesn't know the wap settings flash to E715.
|
 |
Advertisement
|
|
|
|
|
cash_evo6
Posts: 7
Phone Model:
Samsung E710
Service Provider:
Vodafone |
Sat Mar 27, 2004 8:43 pm |
Thanks Don, but, will it change any settings to t mobile's and lock it to t mo's simcards only? and will the video functions disappear? i heard that a E715 doesn't have video capabilities. thanks yeah...... and. I would like to know what wap settings would it get?
Cash. 
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Sat Mar 27, 2004 8:58 pm |
|
Its simlock free, you will lose the video function and you'll get t-mobile settings. For wap thats tzones. But its worthed.
|
|
tororo-kun
Posts: 7
Phone Model:
samsung t100
Service Provider:
vodafone |
Sat Mar 27, 2004 11:28 pm |
 help please
Last edited by tororo-kun on Sun Mar 28, 2004 12:01 am, edited 1 time in total |
|
tororo-kun
Posts: 7
Phone Model:
samsung t100
Service Provider:
vodafone |
Sat Mar 27, 2004 11:29 pm |
um sorry i dont actually understand the use of firmware... sorry
basically i'd like to input the chinese language onto my samsung S500 what are the instructions? and i dont have a data cable only Irda
help please thank you
is this safe for my fone? will there be any problems?
i like my current original samsung menu, i just want to read chinese....
|
|
nsdq
Posts: 7
Phone Model:
V200
Service Provider:
Mobile-One |
Sun Mar 28, 2004 12:03 am |
[quote="bobv200"] | nsdq wrote: |
Mind to elaborate it?
I just can not procede to flash, if I choose V208. (I also tried it on a XP machine).
Did I forget anything? I'm using optiflash 3.6 provided by this webpage.
Can you tell me the details?
Maybe you can send me an email (zhaoyb@cz3.nus.edu.sg).
Just noticed you are also from Singapore and a M1 subscriber...
That means I got a hope.
Thanks in advance. |
Anywhere i can upload the V28xxxx firmware to you.
So that other members can have it too.
Here is a guide hope this can help everyone that has problem flashing. 
Notes:
(NOTE: At all costs please try not to abort this operation half way through either by removing the cable in panic or switching
anything off, if something doesn’t seem right it is better to let the operation finish or you could damage your phone.)
Step – By – Step:
1) Download the following file,
2) Remove your simcard from your phone.
3) Replace the battery. Leave the phone turned off!
4) Go and run the program “Optiflash”
5) Goto the menu and select Options -> Settings.
6) Change the COM port to the one your cable is connected to. Mine was COM port 2. The max transfer speed should automatically be
set to 921600, if not change it to that. (You can find out which COM port its connected to when you use EasyGPRS, as it’s the port
that works and your phone connects to.)
7) Press the “Generic” tab at the top of the screen.
 Under “Specify Hardware Platform” in the drop down box select V200 if u have a v200 or V208 if you have V208
9) Click the tab “Flash&Verify”
10) Browse to find the file “V20XXXXX.sre”
It should be located where you have extracted the files
Make sure the reserved ranges are blank
Press the OK button to return to the main Optiflash screen.
11) Press the FLASH button.
It should have some progress bars and then tell you to Power on.
Attach the phone to the data cable and keep hold of the power button for a few seconds. The phone will now flash. A progress bar
will chart the progress of the operation. This should take between 16 and 25 minutes.
12) A message “all is well” should be displayed. Disconnect the phone from the cable.
Quit Optiflash.
Remove the battery. Leave the phone for a few minutes and then reattach the battery.
13) Switch the phone on still without simcard and do the following. (You will have to keep your finger on the power on button for
longer than normal, keep hold until the phone switches on. If it doesn’t switch on, remove the battery and replace it and leave the
phone for a few more minutes then keep hold of the power button until the phone turns on)
It should say “insert sim card” then enter the codes
*2767*STACKRESET# <====*2767*7822573738#
*2767*MEDIA# <====*2767*63342#
*2767*FULL# <====*2767*3855#
*2767*CUST# <====*2767*2878#
After entering each code the phone will reset.
Phone will load up and Insert Sim Card displayed again.
Last edited by nsdq on Mon Mar 29, 2004 6:18 am, edited 3 times in total |
|
cash_evo6
Posts: 7
Phone Model:
Samsung E710
Service Provider:
Vodafone |
Sun Mar 28, 2004 7:36 am |
thabks don, for your help. but is there any firmware which i can use to flash my phone into a better one with nice graphics like those you said the T-Mo software have and keep the video recording as well? i wouldn't like to lose the video capture capability. Thanks.
Cash 
|
|
cash_evo6
Posts: 7
Phone Model:
Samsung E710
Service Provider:
Vodafone |
Sun Mar 28, 2004 6:04 pm |
Oh yes.... I got a Samsung E700 as well, which i flashed to the firmware E78ZCW12. It's become really cool, having chinese wordings, and the defaulted ringtones becomes True Tones, where it's really sound like a music player. But then, after flashing it, after a while, 3 ringtones went missing, and what's worse was that i really liked the 3 ringtones. Can anyone help me here? i can;t seem to get those 3 ringtones even though i keep flashing it over and over.... thanks
Cash. 
|
|
cash_evo6
Posts: 7
Phone Model:
Samsung E710
Service Provider:
Vodafone |
Sun Mar 28, 2004 9:54 pm |
Don, I need help here again, hope you can help me here. Well.... i have a nokia 6610 which only supports english and some other languages but not chinese. Is there any way i can get it to support chinese languages? and, if yes, would i be able to get it done myself rather than having to go to mobile shops??? thanks in advance
Cash.
|
|
MTMMF
Posts: 2
Phone Model:
Samsung E715
Service Provider:
Optus Australia |
Mon Mar 29, 2004 3:02 am |
Hi guys updated my E715 with the E75UVWL2 firmware and its great....however I dont have a flash any more. Is there any firmware outthere that does not have the crappy Vodaphone menus and the flash works?
Thanks heaps guys!
|
| | |
|
|
Prev 1 ... 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40 ... 50 Next |
|
| Page 30 of 50 |
|
Home > Cell Phone Forums > Manufacturers Talk > Samsung Talk > Samsung Firmware and Flashing > Firmwares & Flashers - Part 1 (Read First) |
|
|
|
