| Page 9 of 50 |
 |
| Prev 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 ... 50 Next |
|
|
|
| Author |
Message |
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
 
Fri Feb 13, 2004 3:16 pm |
|
Which OS do you use? And check your baud rate it must be 115200. And also which optiflash do you use?
|
 |
Advertisement
|
|
|
|
|
phrozact
Posts: 4
Phone Model:
Samsung E700A |
Fri Feb 13, 2004 3:28 pm |
|
Don, any idea if Optiflash v3.6 can be used to backup the E700's firmware? I tried using the E710 and E715's profile, but the program didnt detect my phone. I've got the right COM port, and I turned the phone on only after it asked me to, but still no go. If not, is there anything I can use to back it up? Right now my firmware is E70DZWK6, and I can't find a backup of that firmware anywhere. It comes with simplified chinese input, so I dont want to use another firmware to flash into the phone without first having a backup. Thanks!
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Fri Feb 13, 2004 3:32 pm |
Im also seeking for the E700 flash dumper. I can't find it  . Optiflash is for the firmwares created by optimay.
|
|
pk_terence
Posts: 18
Phone Model:
Samsung E715 and E700
Service Provider:
Optus |
Fri Feb 13, 2004 6:59 pm |
Hi Don,
This fireware E78ZCWI2 can display chinese and input chinese ?
simplified or trad traditional chinese ?
if not.. can you help me find out the traditional chinese fireware for display and input !!
thx a lot !!
Cheer
Terence
|
|
~ Don ~
Posts: 2007
Phone Model:
Samsung D900 FW: D900XAFI1
Service Provider:
NL KPN |
Fri Feb 13, 2004 7:01 pm |
|
It has Traditional and Simple.
|
|
pk_terence
Posts: 18
Phone Model:
Samsung E715 and E700
Service Provider:
Optus |
Fri Feb 13, 2004 9:20 pm |
Hi Don,
Can I use V200 or V208 Data cable for E700?
If it can I will borrow it from my friend....
I just finish download the E78ZCWI2 !!!
Do you have the finial English version fireware can download ?
in case fail fash it, i can flash it back !! 
Thanks for help again, Don !!
Cheer
Terence
|
|
pk_terence
Posts: 18
Phone Model:
Samsung E715 and E700
Service Provider:
Optus |
Fri Feb 13, 2004 10:31 pm |
Hi Don,
Do you have E715 or E710 Picture Table ?
Where I can free download the Samsung DIY ?
Cheer
Terence
|
|
pk_terence
Posts: 18
Phone Model:
Samsung E715 and E700
Service Provider:
Optus |
Sat Feb 14, 2004 8:02 am |
Hi Don,
I had try the V200 Data Cable cant work with E700.
but it can work with E715 
Can you give me suggestion about the E700 Data Cable.
Please look at this link:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=3077937916&categ ory=15046
Do you know that USB data cable can use it to flash the E700 ?
Thanks for help
Cheer
Terence
|
|
splitroaster
Posts: 28
Phone Model:
Nokia N70
Service Provider:
O2 |
Sun Feb 15, 2004 6:50 am |
I have the G1 firmware but I found on another site Matriz start up and shut down screens plus sexy menu which is ok but the girls and in black in white was wondering if anybody knew of any other places to get diff stuff and is the G1 firmware still the best as I see other letters out now like H1 K1 
|
|
f0nt4
Posts: 17
Phone Model:
Samsung D500
Service Provider:
t-mobile |
Mon Feb 16, 2004 12:14 pm |
Hi,
have u selected the right fone in the options menu of optiflash? u should do that or els e the flashing won't work.
| jimmywalton wrote: | HI, I have knackered my phone up. I tried flashing it and everything was going ok until I tried to flash it with some new firmware..I was using optiflash and here is a log file.I E275 1:15:06 PM Power on mobile !
I E276 1:15:16 PM Flash loader version: V4.13
I E277 1:15:16 PM Mobile transfer speeds: 57600, 115200, 230400, 460800
I E278 1:15:16 PM Detected flash chips: 2
I E279 1:15:16 PM 1: Manufacturer: 0xb0, Device: 0x00b1
I E280 1:15:16 PM 2: Manufacturer: 0xb0, Device: 0x00b0
I E281 1:15:16 PM 0xb0/0x00b1: Sharp LRS1393 (or LRS1395 first bank) (8 MB (8388608 Bytes) in 135 sectors)
I E282 1:15:16 PM 0xb0/0x00b0: Sharp LRS1395 (second bank) (8 MB (8388608 Bytes) in 135 sectors)
I E283 1:15:16 PM Total flash size: 16 MB (16777216 Bytes) in 270 sectors
I E284 1:15:16 PM COM1: changing baud rate to 57600
I E285 1:15:17 PM Port info:
I E286 1:15:17 PM Logical port 0: COM1 <-> UART1 at 57600 baud (~100%)
I E287 1:15:17 PM There are no reserved regions defined
I E288 1:15:17 PM Data to be transferred: 11 MB (11698628 Bytes)
I E289 1:15:27 PM Error code: ERR_TOO_MANY_RETRIES
E E290 1:15:27 PM Sorry, an error has occured ! (ERR_TOO_MANY_RETRIES)
I E291 1:16:02 PM PC transfer speeds (COM1): 57600 115200
I E292 1:16:02 PM Loading S-record file: <C:\MY DOCUMENTS\UNLOCKER\sceptre3_sgh_hw4_v200.sre>, RangeCheck=Off
I E293 1:16:04 PM There is 1 memory region in the S-record file:
I E294 1:16:04 PM 1: 0x00000000 - 0x00004a4b = 19020 Bytes
I E295 1:16:04 PM Loading S-record file: <C:\My Documents\unlocker\V20XEWC2.s3>, RangeCheck=On
I E296 1:16:04 PM There are 4 memory regions in the S-record file:
I E297 1:16:04 PM 1: 0x00000000 - 0x00000617 = 1560 Bytes
I E298 1:16:04 PM 2: 0x00004000 - 0x00007a43 = 14916 Bytes
I E299 1:16:04 PM 3: 0x00010000 - 0x00576a53 = 5663316 Bytes
I E300 1:16:04 PM 4: 0x00700000 - 0x00cbd713 = 6018836 Bytes
I E301 1:16:04 PM Power on mobile !
I E302 1:16:29 PM Flash loader version: V4.13
I E303 1:16:29 PM Mobile transfer speeds: 57600, 115200, 230400, 460800
I E304 1:16:29 PM Detected flash chips: 2
I E305 1:16:29 PM 1: Manufacturer: 0xb0, Device: 0x00b1
I E306 1:16:29 PM 2: Manufacturer: 0xb0, Device: 0x00b0
I E307 1:16:29 PM 0xb0/0x00b1: Sharp LRS1393 (or LRS1395 first bank) (8 MB (8388608 Bytes) in 135 sectors)
I E308 1:16:29 PM 0xb0/0x00b0: Sharp LRS1395 (second bank) (8 MB (8388608 Bytes) in 135 sectors)
I E309 1:16:29 PM Total flash size: 16 MB (16777216 Bytes) in 270 sectors
I E310 1:16:29 PM COM1: changing baud rate to 57600
I E311 1:16:30 PM Port info:
I E312 1:16:30 PM Logical port 0: COM1 <-> UART1 at 57600 baud (~100%)
I E313 1:16:30 PM There are no reserved regions defined
I E314 1:16:30 PM Data to be transferred: 11 MB (11698628 Bytes)
I E315 1:16:40 PM Error code: ERR_TOO_MANY_RETRIES
E E316 1:16:40 PM Sorry, an error has occured ! (ERR_TOO_MANY_RETRIES)
I am flummoxed as to what is wrong. My phone is now useless. It was a samsung v200 now it is just a small brick!.
Any help would be appreciated...
jim |
Sharp LRS1395 (second bank)
sharp?
good luck
greetz f0nt4
|
| | |
|
|
Prev 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 ... 50 Next |
|
| Page 9 of 50 |
|
Home > Cell Phone Forums > Manufacturers Talk > Samsung Talk > Samsung Firmware and Flashing > Firmwares & Flashers - Part 1 (Read First) |
|
|
|
