D900 flash cable problem

Hey Don

In the next day or so i will be changing my firmware over from D900DXFG5 to D900JPFG6, now i know this fiirmware comes with the answering machine but i was also wondering does it come with all the interactive themes? eg Big Ben in England, pisa for italy etc.

I noticed you posted a couple of programs earlier in this thread called Rasman and Ugo, do these programs have anything to do with installing the themes onto your phone and how the hell do you do it?

Thanks mate!!!!

Hi Don,
I have the flashing Cable for the D900, but I have the exact same problem as pateldaku computer will not recognize the cable.

My phone does not start charging when connected, probably since I do not see a pin for the 5V.

What driver should I use and where do I get it?
Thanks

@SaveFerris
All firmwares have those themes.

You can modify (Not install/add) themes with Resmanager. And uGo is the "Living World" theme thingy.

@zagallaent
Its a good thing that your phone isn't charging that means that you have the right cable.

Try these drivers to get it working:
http://members.chello.nl/dondiegox/Samsung/FTDI_USB_Driver.zip
http://members.chello.nl/dondiegox/Samsung/USB.zip
http://members.chello.nl/dondiegox/Samsung/USB-Device-Driver.zip

Are these the drivers for the E330?
That will work ok I take it?
Thanks

They work with the most data cables, it depends on wich chip is inside the cable.

I have tried installing several of these drivers, I got a few of them to work, meaning windows says they are working.

I ran OneNAND downloader v1.8, I hit the start button with the phone off, it tells me to power on the phone.

When i quickly push the power button, it give me an error, bad communiction with chip.

I tried some other drivers, now I am not getting any errors, even with the old drivers now.

I get no errors, and now nothing happens either. I am running on com port 15, driver FTDI, and windows calls it a USB DataCable VCP

If thats the case, then i'm wondering why my current firmware doesn't have any of these themes, all thats displayed is grass with background of the sky, I have been all over the world with my phone hasn't changed, from Rome to Dubai to Australia.

My current firmware is D900DXFG5

@SaveFerris
Is the phone new or second hand? If its second hand I think the person who had it before might have deleted those files for 10mb extra free space. But if its new that's strange because uGo is a feature of the D900 and i've also seen it in there commercials. You could sue them for misleading you or just flash your phone with a tfs from another d900 firmware. And if it still doesn't work it means that your dx firmware doesn't support uGo.

Btw: How much free space do you have?

@zagallaent
Did you remove the phones battery first everytime you retried to connect?

I did buy my phone band new.

Memory Status:
Images : 1744KB
Music: 4752KB
Available space: 60994KB.

So just Flash my phone with a new Firmware like D900JPFG6 and that should put it on there, if it doesn't and my ( dx firmware ? ) doesn't support Ugo then what do i do?

HI Don,
What do you mean by removing the battery?
Do those error messages make sense to you?
Thanks

D900 flash cable problem

Similar Topics

New Samsung Cell Phones

Subscribe to Our Feed

Carriers Talk

Manufacturers Talk

Mobiledia Community