Black RAZR V3 dead after bad flash

I saw many posts regarding a a dead phone after attempting to flash. I am also in the same mode as I have a KRZR I bought recently which I attempted to flash. Unfortunately it did not complete (and I didnt have a viable backup ) and as a result I have a phone which is essentially dead. Is there any way to revive it/fix it. I can power up and get into Boot Loader mode. It shows the following:

Boot Loader
0A.B2.
SW Version:
R4527_G_08.12.10R_B

OK to Program
Connect USB
Data Cable

================================================

in addition when I connect to RSD Lite is displays the following.

IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: R4527_G_08.12.10R_B
Flex Version: GSTCNRYT677VV0BC
Bootloader Version: v0x000AB2
DRM Version: N / A
Phone Type: Production (58100EC0071A092B31CB9649B944)

I am at a loss on how to correct or whom I can engage to fix. I hope it is still possible. I would appreciate your advice on how to possibly fix this or whom I can send this phone to fix.

Have you tried to flash a different monsterpack?

I have tried to flash with another Monster Pack but continually get errors which result in an incomplete flash and resulting dead phone.

You could try to testpoint and flash

Thanks for advice, I was able to work with Old_Fool and he was able to fix and bring back to life. Thanks again

Hi all, Hi Mikekay10! (we met on another forum)

I'll revive this thread, because all what's said here looks quite familiar to me

I land here after multiple research to solve my problem with a V3.
Initially trying to load a language pack then trying a backup which failed, I finished with a monster pack that stopped in the middle "of the river"!
And to make it short, I'm now in the same situation as Asteigrod a few post here above with my screen showing:

Boot loader
08.29
SW version
R374_G_OE.42.15R (which is the one which didn't go to the end)

ok to program
USB
Transfer mode
PHONE CODE SIG
35:02:

RSD lite says a terrible: S Flash Neptune LTE

At the very beginning, I think my problem started because of my boot loader version which I think I'm close to be the only one to have, and which is not suitable for most of the MP found on the net.

Do you guys see a solution? I don't know anybody with a smart clip or anything else. So if that's the soution I'll bring it to the dealer and see what goes on.

Thanks for reading me and for any help you could provide.

Cheers
JP

Old_Fool need your help, daughter screwed up her v3 when she tried flashing, it comes on for about 3-5 secs. then noting, have readed this thread, tryed all options, no luck, can you help/or fix it ? i don't know what she used, said she backed it up, i don't where or what she used, can you help ?

bob davis

Does RSD Lite recognise phone?

hello guys.please help me.
ok.i flash my vx3 with Heartlessmod with Itunes (using motokup ).
After finish flashing and then show at the motokup flashing successful i try to turn on my phone but it cant. Its just blank dark screen. i try to enter the bootloader *+#+ON BUT it cant work t0o.
When i connect the phone to the pc the blue light on the bottom turn on but its still blank dark screen on the phone.and the pc show -USB DEVICE NOT RECOGNIZED.one of the usd device attached to this computer has mulfuntioned,and windows not regognize it.so what should i do now.plzzzz help me.

Black RAZR V3 dead after bad flash

Similar Topics

New Motorola Cell Phones

Carriers Talk

Manufacturers Talk

Mobiledia Community