| Author |
Message |
juks
Posts: 3 |
 
Tue Feb 27, 2007 10:51 am |
Hello everybody,
first of all I'm french so sorry for my english.
After a long time not using my V3 because I lost my battery, I buy a new one.
So first day, I charged it all night long.
The second day, when it was full, I used the phone a lot, taking pictures and recording videos, so the evening the V3 stopped normally because of the battery. I tried to boot again after few minutes to uncharge totally the phone, the bootloader appears and the phone shut(ed?) down.
SO I tried to charge the phone but when I connected it, the keybard flashed a lot and I couldn't boot up the phone, I let it connected to the charger all night long.
The third day, the keyboard wasn't flashing anymore. I disconnected it from the charger, and I tried to boot up but it doesn't work ! I removed the battery waited a few hours and put it on again, it flashed like :
O O O O O o o o o . . . . the end :/
you know like the battery was empty.
I tried to boot up # * ON but it doesn't work, I tried to connect the phone to the Computer but it doesn't recognize it, of course I have the driver but the phone is off so it can't be recognize.
Is it possible to charge the phone with the usb cable?
What is the problem?
Thank you for your answers 
|
 |
Advertisement
|
|
|
|
|
veilfore89
Posts: 1396
Phone Model:
Motorola Q9h(GSM), V551(GSM), T720i(GSM), T720g(GSM)(DEAD
), T730(CDMA), Samsung x427m(GSM), Siemens A56i(GSM), E-815(CDMA)
Service Provider:
AT&T Wireless |
Wed Feb 28, 2007 3:52 am |
|
Try using a wall charger to get life back into the lithium, when using usb ports on your computer the computer doesn't know wether or not to send off power until a driver is assigned which requires the device to be on and recognized, if you rely souly on the USB to charge then my recommendation is a wall or car charger to get it going again.
|
|
juks
Posts: 3 |
Wed Feb 28, 2007 4:29 pm |
hi thanks for your answer
When I was talking about charging my phone it was with the wall charger ! I had never charge my phone by usb ports.
When i connect the phone by usb i can feel an 'electrical' sensation when i touch the metallical sides of the V3 but when i connect it to the wall charger i don't feel it.
My wall charger can't be dead I didn't do anything to it
|
|
Malibu21
Posts: 1002
Phone Model:
V3xx Lightly Modded, V6 Maxx Tweaked nicely.
Service Provider:
The New AT&T |
Wed Feb 28, 2007 5:25 pm |
|
try a different battery to verify that its not the handset if it charges fine, its the battery.
|
|
juks
Posts: 3 |
Wed Feb 28, 2007 8:44 pm |
|
ok thank you I'll try it =) i get you updated?
|
| | |
|
|
|
|
