The caller id on my 3 recently purchased L6 phones will not show contact names. Nor will a personalised ring tone for a contact ring. I have called Motorola several times and get a different answer each time. The manual shows how to activate but it doesn't work. Any suggestions?
Advertisement
mikekay10 Posts: 2958
Service Provider: Vodafone
Fri Mar 09, 2007 4:59 am
Have you saved the contacts to phone menu?
You may need to edit SEEM 0032_0001 offset 3E - bit 4: for purposes of linking name in phonebook with caller ID number, xxx-xxxx = xxx-xxx-xxxx = 1-xxx-xxx-xxxx = +1-xxx-xxx-xxxx (0 on, 1 off)
Cardsfan_64 Posts: 4
Fri Mar 09, 2007 11:01 am
After lengthy discussion with Motorola Tech, it was determined that the phones are imports.
mikekay10 Posts: 2958
Service Provider: Vodafone
Fri Mar 09, 2007 11:04 am
Thats irrelevant - it should still work or can be made to do so
Cardsfan_64 Posts: 4
Fri Mar 09, 2007 1:55 pm
Mikekay,
Do you know of a solution for this. I read your first post and it is too technical for me. I am open for any instructions and directions for this. Motorola, nor Cingular has a solution.
Thnaks.
mikekay10 Posts: 2958
Service Provider: Vodafone
Fri Mar 09, 2007 2:59 pm
Take a look at the tutorial section and the seem editing guide, chances are the SEEM edit above will fix it.
If not I would probably look for a Cingular flex and flash that
Cardsfan_64 Posts: 4
Fri Mar 09, 2007 3:56 pm
Mikekay_ you wrote [i]"Take a look at the tutorial section and the seem editing guide, chances are the SEEM edit above will fix it.
If not I would probably look for a Cingular flex and flash that "
Can you send me a link to this editor please. I have searched and cannot find it. In the first post from you, you gave some instruction. I did not understand what you was telling me or how to navigate to those commands. Any help you can give is greatly appricated.
View more 
