| Author |
Message |
xbcustoms
Posts: 2 |
 
Sun Apr 15, 2007 5:57 pm |
Hi yall,
Well, i had a V3 that i had flashed incorrectly, so i decided to invest in a Smart-Clip (LIFE SAVER) Well, i was able to repair the PDS, and Reflash it with the
R374_G_0E.42.09R_MXLP0001_GSMV3MXCIN01NA0F5_superfile_MOTOX
, and there was no display on either the inside and outside lcd, however i do know that it is now unlocked, because i can use my cingular sim card and make and receive calls, so i did some more research and was told to reflash it with the following
R374_G_0E.42.0CR_reflash_MOTOX
well the flash went just fine (using RSD Lite) however there is still no display. the phone boots up just fine i can hear the sound and make and receive calls however even when i try to go into boot-mode there is still no display, now im begining to wonder if its a hardware issue. possibly a bad flex cable? i just dont know, this sort of sucks considering i just dropped $330 on the smart-clip. Some one please help, i can best be reached on AIM.
AIM: xbcustoms
YAhoo: Xbcustoms
Email: xbcustoms at yahoo dot com
Preferably IM me on AIM thank you so much, and BTW thanks Old fool for Personaly Calling me you helped a great deal.
|
 |
Advertisement
|
|
|
|
|
Old_Fool
Posts: 2125
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Sun Apr 15, 2007 7:40 pm |
you need to go to boot loader.come and down load the 40.9cr for this problem.
You should flash it with core flash after PDS repair.
Try the two forum form smart clip support site that talk of this problem and how to solve it
|
|
xbcustoms
Posts: 2 |
Sun Apr 15, 2007 9:10 pm |
|
Well theres now even a larger problem, when i was taking the phone apart, the flex cable broke into two, so now i need a new flex cable, UGH! and Old Fool Check your Pm i need some more help. thanks so much, once the new flex cable is ordered i should be able to try this out.
|
| | |
|
|
|
|
