| Author |
Message |
ashtech
Posts: 7 |
 
Fri Jun 01, 2007 8:43 am |
tried to flash my v635 with a monster pk, 90r and it failed. kept loading back in bootloader mode, so i flashed back with 6fr and when the phone was bein rebooted, it never came back on.
now it not even goin to bootloader mode and when i connect it to the pc, it says USB device not recognized.
used multiflashflex and rsd, still nothing, what can i do the fix this phone?
|
 |
Advertisement
|
|
|
|
|
Old_Fool
Posts: 2129
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Fri Jun 01, 2007 10:19 am |
|
Have you try to press and hold down all 3 keys *,# and power?
|
|
ashtech
Posts: 7 |
Fri Jun 01, 2007 12:31 pm |
|
yea, not even that working. can this be fixed in any way
|
|
Old_Fool
Posts: 2129
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Fri Jun 01, 2007 3:09 pm |
|
Try usr the thin wire, one end touch the pin #4 and the other touch Pin #5 then press power key to power in on boot loader mode
|
|
ashtech
Posts: 7 |
Fri Jun 01, 2007 6:57 pm |
i dont understand fully, i usin a thin wire and touchin pin 4 and 5 on the phone, thats the data side, not the 3 pins used for chargin, am i right.
if so, i will try, if that doesnt work now? will a smart clip work? cause the computer not even recogizin the device.
thanks again "old fool"
|
|
Old_Fool
Posts: 2129
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Sat Jun 02, 2007 1:26 am |
4 and 5 counting from right to left or 12 and 14 from left to right.
Yes smart clip will fix it no problem
|
|
ashtech
Posts: 7 |
Fri Jun 08, 2007 10:42 pm |
|
hey dude, that didnt work. what now?
|
|
Old_Fool
Posts: 2129
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Fri Jun 08, 2007 11:42 pm |
Trying again, it is take awhile for you to get it right, i know because i have to try so may time before.
You can find some one with smart clip to fix it for you or i can fix it for you with a small fee. Email me if you are interested
|
|
ashtech
Posts: 7 |
Mon Jun 11, 2007 1:47 pm |
|
hey i got into bootloader, it showing the bootloader version, the sw version and it says, MEM_MAP Blank, service required.
|
|
Old_Fool
Posts: 2129
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
ATT |
Mon Jun 11, 2007 2:12 pm |
You are ourt of luck then. It's need to have PDS repair then flash with proper MP to get it working again.
You can pay for GOT one day pass (gsmonline tool) to repair PDS or you can fine some one with smart clip or Ultima box to do that.
I can also fix it , email me if interested
|
