| Author |
Message |
licenz2kill
Posts: 2 |
 
Thu Dec 06, 2007 8:46 pm |
Hey everyone, I am very new here and in need of a little help. You see i was given a razr V3 from my Girlfriend and she wants me to unlock it. I had never unlocked a phone before and this is my first time. Anyway enough of that. My problem is that i simply cannot unlock the phone. I have followed the tutorial on this site completely and i have successfully flashed the phone to:
boot loader 07.D0
SW version at R74_G_0E.40.9CR
The phone still functions fine but i cannot unlock it. I have tried using Moto_unlocker_2005 and it instantly says the unlock was successful but when i try to use my cingular sim card it still says contact service provider. I have also tried using P2K easy tools versions 3.7 , 3.9 , 4.1 , and even 5.3 .
here are the error messages with the corresponding p2k easy tools version number:
Version 3.7:
Connecting to phone .
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 07D0
Sending loader to phone .
Loader sent OK.
Get info from phone .
PDS info: PDS_4007
ADR info: 126E05B0
Powering down.
Connecting to phone .
ERROR: Could not connect
ERROR: Connect error
Version 3.9:
Connecting to phone .
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 07D0
Sending loader to phone .
Loader sent OK.
Get info from phone .
PDS info: PDS_4007
ADR info: 126E05B0
Powering down.
Connecting to phone .
ERROR: Could not connect
ERROR: Connect error
Version 4.1:
Connecting to phone .
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 07D0
Sending loader to phone .
ERROR: Receiving READY
ERROR: Send loader failed (2)
Version 5.3:
Connecting to phone .
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 07D0
Sending loader to phone .
ERROR: Receiving READY
ERROR: Send loader failed (2)
I am not sure what to do about these errors or work my way around them. If anyone is able to help me i would be much obliged.
edit: i have also tried flashing the phone with different SW's and it still wont unluck
|
 |
Advertisement
|
|
|
|
|
Old_Fool
Posts: 2118
Phone Model:
If it's locked, ican unlock it. If you brick it, I can fix it
Service Provider:
Tmobile |
Fri Dec 07, 2007 12:52 am |
Using P2k easy.
open p2keasy, connect fone to PC
check lock then check spunlock then choose razr the click on do select job then follow all the prompts.
Is this how you do it? cause form the look of the log you post does not look like you have do it the right way
|
|
licenz2kill
Posts: 2 |
Fri Dec 07, 2007 7:57 pm |
this is exactly what i do, i get prompts in version 3.7 and 3.9 but in versions 4.1 and 5.3 no prompt came. but this time i tried something else. I loaded up the phone with motophoenix because i knoew that it would detect it, once the phone was detected i tried using p2k easy tools and walla it worked. i believe it was a driver issue i was having. well anyway thanks for all the help. i appreciate your quick response. thank you 
|
|
Global Unlock
Posts: 20 |
Wed Dec 12, 2007 2:23 pm |
You can also just enter a code and unlock it. Does not matter what your firmware version is or anything else - http://wwwRed forum rules befor posting.
Do not promote your bussiness without ADmi permission
|
