>>Now do the following step-by-step (without connecting the cable!)
>>
>>1. First install the cable modem driver from cd /file
>>2. Then the cp210x driver
>>3. Restart the PC.
>>
>>Then connect the cable to PC first, then connect the cable to phone.
>>Switch
>>off and then on the phone. ensure there is enough battery life or put it
>>on
>>charger!
>>
>>Now the pc would detect the cable or phone, just choose the files look for
>>"NOKIA 3220 CABLE/MODEM", in XP it should auto detect now. or repeat this
>>function after restarting PC.
>>
>>Now for the modem Go control panel, phones/modems, click add modem. Choose
>>nokia 3220 cable if it shows. choose port 3. and then try to connect your
>>gsm isp. (whats your ISP?)
>>
>>If not then change to port 2 and try again, lest try port 1. keep the
>>speed
>>at 115kbps or so. if you are successful then you can increase it 300+ as
>>3220 has EDGE for higher speeds.
>>
>>This should work, lest mail me back.
>>
>>Vijay
Advertisement
Chantu Posts: 1
Sun Mar 11, 2007 1:50 am
Hi All,
Here is what i did for installation.
Windows XP SP 2 - Asia - Nokia suite on DKU 5 (Non-Orig) Cable
Step 1
========
DO NOT CONNECT CABLE TO PC
Download the DKU 5 Cable s/w from Nokia Website
Unzip the file and run the .exe file and click on the DKU 5 driver installation.
STEP 2
======
DO NOT CONNECT CABLE TO PC
Download the PC Suite s/w from Nokia Website
English Version direct download link (not allowed to post)
Install the Software.
The software will auto run on XP
STEP 3
======
Connect the cable to PC and Other side to your phone
Window will make a sound and it will ask you if it can find driver from internet.
I checked yes on search on internet and then went for default option that installed the driver.
Now the problem comes, The Nokia suite is stuck up on
Select the ocnnection -> Cable connection -> connect cable screen
It is searching and not finding the phone at all.
STEP 4
======
Check DEVICE DRIVERS ( Right click on My Computer - Properties - hardware - Device Manager)
Clcik on PORTS
If you installed cable s/w properly you will see
CP210x USB to UART Bridge Controller (Com 3) << Note this COM port number.
Step 5 (Final Solution)
=======
On right hand bottom Quick Launch click on Nokia PC suite
The program will open up and will show NO phone connected
Click on Manage connection
Click on Serial Cable (DKU5, CA-42)
On top Click on Configure
90% chances are this field is blank for you.
From the dropdown choose the Port Number that you saw on Device Manager step 4.
For me it was Com 3
Select and click on OK.
You will now find the Phone Connected.
I hope this will solve lot of peoples problem.
Drop me an email if this info heled you.
Regards
Chantu at chantuDotCom
Platonium Posts: 1
Sun May 20, 2007 9:48 pm
I have a 'made in China' DKU-5 / EK21005771 cable and went through some trouble getting it up and running.
Finally found the driver here:
(it won't let me post URLs, so you'll have to copy/paste and fix the link by hand)
h t t p : / / w w w . p r o l i f i c . c o m . tw/eng/downloads.asp?ID=31
h t t p : / / w w w . p r o l i f i c . c o m . tw/support/files//IO%20Cable/PL-2303/Drivers%20-%20Generic/Windows/wd_ pl2303h-hx-x_v20019v2021.zip
To install in XP:
unzip and run exe
insert cable - cancel out of 'found hardware' wizard
open device manager
right click on unknown device, choose uninstall
from the menu select action/search for new hardware
device should now be recognized and shows up under Ports (Com & LPT)
Good luck,
Herb
orangedan75 Posts: 1
Phone Model: 9210i
Sat Jun 02, 2007 1:04 am
Does anyone know the differences of using Nokia PC suite and not? I used to use no Nokia PC suite. It's quiete slow. but i think it's from my GSM operator. are there good free softwares to increase the access speed?
Basti Posts: 3
Phone Model: Nokia 3220
Service Provider: Sunrise
Fri Jul 06, 2007 6:54 am
Still active. This thread is starting to become legend!
Vijay_india Posts: 4
Phone Model: Nokia 3220 / 6610
Service Provider: Hutch / Vodafone
Thu Aug 30, 2007 7:57 am
Anyone got problems with using DKU 5, shoot your probs to me.
Well, this thread started in 2003 and still going strong.
Long live DKU 5.
Vijay AT careersearch DOT org
girlee32114 Posts: 1
Tue Aug 19, 2008 9:04 pm
Just bought a laptop running Windows Vista SP1 and installed the DKU-5 drivers (for 2000/XP) and set up an internet connection. Well connecting isn't a problem, it connects easily but then it drops the connection almost immediately sometimes, and after a few minutes other times.
It works on an XP machine I have (that's where I'm connecting from right now). So I figure Vista is the problem, probably doesn't support the drivers. Does anyone know where I can get updated drivers? Or another way around this problem? Any help would be REALLY appreciated.
admin_papa Posts: 1
Tue Sep 02, 2008 12:19 pm
Hello Everybody
Just wanted to share my new experience.
If your system fails to run due to an error corresponding to missing HAL.DLL, invalid Boot.ini or any other important system boot files you can repair this by using the XP installation CD. Simply boot from your XP Setup CD and enter the Recovery Console. Then launch "attrib -H -R -S" on the C:\Boot.ini file and delete it. Run "Bootcfg /Rebuild" and then Fixboot
Cheers,
Carl
thang543210 Posts: 1
Sun Apr 12, 2009 11:22 am
eN-T wrote:
Quote:
I have big problem with my DKU-5 cable, i can't find any driver for it.
All ways to fix the problem that i found in this forum, not worked.
My cable:
DKU-5
R/N: WT048000317
M/N: SM-K5
MADE IN CHINA
device instance Id
USB\VID_0EA0&PID_6858\5&3342BE81&0&2
and then i connect it to my pc it writes allways:
found new hardware "USB-UART Tx Line"
can anyone help me?
Jazam191214
Quote:
Try download DkU-5 driver from prodigy m a s t e r . c o m/download.html the one has Indigo Rose Corp.
Before uninstall everything about Nokia, PL2303. then Install and restart your pc. connect DKU-5 y donīt recognize unplug and plugin again, until the pc says Kingsun USB to com, then let the pc install the driver, install PL2303 and then Nokia PC Suite. It Work for me.
Good Luck.
I can't connect to my phone nokia 5140i
my phone display "Data enhancement connect"
and after "Enhancement not supported"
How can I connect my 5140i to pc?
thanks
bhavinis Posts: 1
Thu Jun 18, 2009 3:20 pm
hi I am chirag here.
I got dku - 5 china and in xp it is showing as usb-uart tx line in yellow mark.
I tried all sort of drivers but drivers are not getting found.
I need urgent help.
revert on b h a v i n i s at the rate hotmail . com
Vijay_india wrote:
Anyone got problems with using DKU 5, shoot your probs to me.
Well, this thread started in 2003 and still going strong.
View more 
